IBM Support

JR53173: BPMCONFIG -CREATE COMMAND DOES NOT RECOGNIZE THE PROFILE THAT WAS CREATED UNDER A NON DEFAULT LOCATION

Subscribe

You can track all active APARs for this component.

 

APAR status

  • Closed as program error.

Error description

  • When you create the IBM Business Process Manager (BPM)
    profiles either by using the manageprofiles command or the
    profile management tool (PMT) GUI, select a non-default
    location (that is, a location other than
    <install_root>/profiles/<profileName>) for the profile, and
    run the BPMConfig -create command to configure the IBM BPM
    deployment environment but do not specify the
    bpm.dmgr.profilePath and bpm.de.node.#.profilePath properties
    in the input configuration properties file, the BPMConfig
    command stops with an error similar to the following error:
    
     CWMCB0003E: A profile was not created for DmgrProfile2.
    
    The BPMConfig log file contains a validation error similar to
    the following validation error:
    
        profileName: DmgrProfile2 is already in use. Specify
    another name.
    

Local fix

  • You can workaround the problem by specifying theprofile  path
    in the deployment.properties file
    
    For Deployment manager use indicate your Dmgr iprofile path
    bpm.dmgr.installPath=/IBM/BPM855/
    bpm.dmgr.profilePath=/IBM/Profiles/myDmgr
    
    For customNode
    bpm.de.node.1.installPath=/IBM/BPM855/
    bpm.de.node.1.profilePath=/IBM/Profiles/MyCustomProfile1
    

Problem summary

  • ****************************************************************
    * USERS AFFECTED:  IBM BPM Advanced                            *
    *                  IBM BPM Standard                            *
    *                  IBM BPM Express                             *
    ****************************************************************
    * PROBLEM DESCRIPTION: When you create the IBM Business        *
    *                      Process                                 *
    *                      Manager (BPM) profiles either by        *
    *                      using the                               *
    *                      manageprofiles command or the profile   *
    *                      management tool (PMT) GUI, select a     *
    *                      non-default location (that is, a        *
    *                      location                                *
    *                      other than                              *
    *                      <install_root>/profiles/<profileName>)  *
    *                      for                                     *
    *                      the profile, and run the BPMConfig      *
    *                      -create                                 *
    *                      command to configure the IBM BPM        *
    *                      deployment environment but do not       *
    *                      specify                                 *
    *                      the bpm.dmgr.profilePath and            *
    *                      bpm.de.node.#.profilePath properties    *
    *                      in                                      *
    *                      the input configuration properties      *
    *                      file,                                   *
    *                      the BPMConfig command stops with an     *
    *                      error                                   *
    *                      similar to the following error:         *
    *                      CWMCB0003E: A profile was not           *
    *                      created for                             *
    *                      DmgrProfile2.                           *
    *                      The BPMConfig log file contains a       *
    *                      validation error similar to the         *
    *                      following                               *
    *                      validation error:                       *
    *                      profileName: DmgrProfile2 is            *
    *                      already                                 *
    *                      in use. Specify another name.           *
    ****************************************************************
    * RECOMMENDATION:                                              *
    ****************************************************************
    When the bpm.dmgr.profilePath and the bpm.node.#.profilePath
    properties are omitted from the input configuration properties
    file for the BPMConfig command, these properties start with
    the corresponding default profile location, which is
    <bpm.dmgr.installPath>/profiles/<bpm.dmgr.profileName> for the
    deployment manager profile and
    <bpm.node.#.installPath>/profiles/<bpm.node.#.profileName> for
    the managed node profiles. If a profile already exists at a
    non-default location, the profile is not found and the
    BPMConfig command tries to create the profile, which leads to
    an error.
    

Problem conclusion

  • A fix is available for IBM BPM V8.5.6.0 that allows the
    BPMConfig -create command to find  existing profiles even when
    they have been created in a non-default location and the
    corresponding bpm.dmgr.profilePath and
    bpm.de.node.#.profilePath properties have not been set in the
    input configuration properties file.
    
    On Fix Central (http://www.ibm.com/support/fixcentral), search
    for JR53173:
    
    1. Select IBM Business Process Manager with your edition from
    the product selector, the installed version to the fix pack
    level, and your platform, and then click Continue.
    2. Select APAR or SPR, enter JR53173, and click Continue.
    
    When you download fix packages, ensure that you also download
    the readme file for each fix. Review each readme file for
    additional installation instructions and information about the
    fix.
    

Temporary fix

Comments

APAR Information

  • APAR number

    JR53173

  • Reported component name

    BPM ADVANCED

  • Reported component ID

    5725C9400

  • Reported release

    855

  • Status

    CLOSED PER

  • PE

    NoPE

  • HIPER

    NoHIPER

  • Special Attention

    NoSpecatt

  • Submitted date

    2015-04-21

  • Closed date

    2015-05-24

  • Last modified date

    2015-05-24

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

Fix information

  • Fixed component name

    BPM ADVANCED

  • Fixed component ID

    5725C9400

Applicable component levels

  • R800 PSY

       UP

[{"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Product":{"code":"SSFTN5","label":"IBM Business Process Manager Advanced"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"855","Edition":"","Line of Business":{"code":"LOB36","label":"IBM Automation"}}]

Document Information

Modified date:
24 May 2015