IZ07546: READING ENTERED IN WORK ORDER VIA THE TASK LINE ON THE ACTUALS TAB IN WORK ORDER TRACKING NOT UPDATING ASSET.

APAR status

• Closed as program error.

Error description

• Reading entered in Work Order via the task line on the Actuals
  tab in Work Order Tracking not updating Asset.
  
  Maximo - 6.2.1 Build 156 DB build V600-530
  
  Windows 2003
  
  Weblogic 8.1.4.0.
  
  Measurement information entered in the Work Order application on
  the
  Plans/Actuals tab, on a task line item, updates the reading for
  the
  Measurement Point in Condition Monitroing application, however,
  in the Assets
  application if you recall the asset and select Manage Meter
  Readings
  History there is no reference to the reading which was entered
  from the
  Work Order application.
  
  Steps to replicate:
  
  Create Asset (11430TEST)
  
  Create a Job Plan with this asset (JP11430TST)
  
  Create a Meter O-PressureTST with the Type - Gauge, Unit - PSI
  
  Create a Condition Monitoring Point, Assign Asset (11430),
  Assign
  Meter (O-PressureTST).
  
  Upper Warning Limit - 4500
  
  Upper Action - 5000
  
  Lower Warning Limit - 3500
  
  Lower Action Limit - 3200
  
  Upper Limit Job Plan, Lower Limit Job Plan (JP11430TST)
  
  Upper Priority 2, Lower Priority 2
  
  
  
  Open a new work order, assign Asset, 11430TEST, Assign job plan
  JP11430TST
  
  
  Approve the work order, then enter on Actuals tab, for
  one of your tasks a Gauge Meter value (4000) for Measurement
  Information
  
  Save
  
  Go back to your Condition Monitoring application and recall the
  point you created for the Asset 11430TEST, value will be
  recorded (4000)
  
  Go to your Asset (11430TEST), Select Actions Drop Down Menu,
  select
  "Manage Meters History"- Characteristics and Gauge Meter
  Readings is not updated with the gauge meter reading that was
  entered on the Work Order.
  
  Tested and confirmed the behavior. The question is:
  
  Should the reading recorded on the Actuals tab be relevant and
  update to
  the Asset, as it is recorded against a condition monitoring
  point? I think it
  should. Further testing indicated that placing a value in the
  Measurement Value field
  without a Measurement Point Value on the Actuals tab in the WOT
  app also
  does not show up in the Manage Meter Readings History in the
  Asset application. It does not show up if a Measurement Point is
  not entered, either in the aforementioned option
  or in the Condition Monitoring application as expected. If the
  Enter
  Meter Readings option is used in the Work Order Tracking app
  then the
  value entered does show up in the Manage Meter Reading History
  option in
  the Assets app.
  
  Tested the client's scenario in Maximo 5.2 and while the
  functionality
  is different, ultimately the reading, entered on the task line
  on the
  Actuals tab, was updated on the Measurement tab (which in 6.2.1
  is
  replaced by the Select Actions option Manage Meter Readings
  History) for
  the equipment in the Equipment application. It also updated the
  measurement reading for the point in the Condition Monitoring
  application. In testing in 5.2 I also noticed that there is no
  Enter
  Meter readings option in the Select Actions menu of the WO
  Tracking
  application, just another way 5.2 differs from 6.2.1.
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED: All Maximo users                             *
  ****************************************************************
  * PROBLEM DESCRIPTION: Fields: assetnum, location, inspector,  *
  *                      metername, assetid  were not saved in   *
  *                      the measurement table                   *
  *                                                              *
  ****************************************************************
  * RECOMMENDATION:                                              *
  *                                                              *
  *                                                              *
  *                                                              *
  ****************************************************************
  READING ENTERED IN WORK ORDER VIA THE TASK LINE ON THE ACTUALS
  TAB IN WORK ORDER TRACKING NOT
  

Problem conclusion

• Fixed in the FldWOMeasuremtnValue.java, FldWOMeasureData.java
  and FldWOPointNum.java
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

• MAXIMO
  

Fix information

• Fixed component name

  ASSETS

• Fixed component ID

  5724R46AS

Applicable component levels

• R621 PSY

     UP