IV96995: SMARTMODEL UNABLE TO MODEL INTERFACE AUTHENTICATION ON CISCO 3750

APAR status

• Closed as program error.

Error description

• Using ITNCM 6.4.0 on Linux platform we are experiencing problem
  on
  Cisco 3750 where it doesn't model the interface authentication
  configuration as per below configuration line, none of the
  authentication lines are displayed in the smartmodel
  view
  
  Below are the configuration on the interface that aren;t
  displayed on
  the smartmodel
  
   authentication control-direction in
   authentication event server dead action authorize vlan 527
   authentication event server dead action authorize voice
   authentication host-mode multi-auth
   authentication order mab
   authentication priority mab
   authentication port-control auto
   authentication timer restart 300
   authentication timer inactivity 3600
   authentication violation restrict
  
  from the following complete interface configuration
  
  interface GigabitEthernet1/0/1
   description END-
   switchport access vlan 527
   switchport mode access
   switchport voice vlan 1051
   ip arp inspection limit rate 50 burst interval 3
   authentication control-direction in
   authentication event server dead action authorize vlan 527
   authentication event server dead action authorize voice
   authentication host-mode multi-auth
   authentication order mab
   authentication priority mab
   authentication port-control auto
   authentication timer restart 300
   authentication timer inactivity 3600
   authentication violation restrict
   mab
   snmp trap mac-notification change added
   snmp trap mac-notification change removed
   no lldp med-tlv-select power-management
   no cdp tlv server-location
   no cdp tlv app
   spanning-tree portfast
   spanning-tree bpduguard enable
   service-policy input PM_END-Wks-QoS
   ip verify source
   ip dhcp snooping limit rate 10
  
  The configuration is synch and import successfully, the stored
  native
  command set is getting the complete configuration and displayed
  the
  complete interface configuration, the problem is the Smarmodel.
  It
  doesn't show the authentication sub tree under the interfaces.
  

Local fix

• not workaround
  

Problem summary

• ****************************************************************
  * USERS AFFECTED:                                              *
  * Users using cisco 3750 device having interface               *
  * authentication                                               *
  ****************************************************************
  * PROBLEM DESCRIPTION:                                         *
  * SMARTMODEL UNABLE TO MODEL INTERFACE AUTHENTICATION ON CISCO *
  * 3750                                                         *
  ****************************************************************
  * RECOMMENDATION:                                              *
  * The fix is released to customer and it's also merged into    *
  * latest code base.                                            *
  ****************************************************************
  

Problem conclusion

• The fix is released to customer and it's also merged into latest
  code base.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  N/C CONFIG MGR(

• Fixed component ID

  5724Z3100

Applicable component levels

• R641 PSY

     UP

• R642 PSY

     UP