IT42602: QUERY REPLNODE WITH A SPECIFIC SERVER STILL SHOWS UP AFTER REMOVE REPLNODE

APAR status

• Closed as program error.

Error description

• QUERY REPLNODE with a specific IBM Spectrum Protect server that
  had previously been removed by REMOVE REPLNODE will show up in
  the output. This is a reporting issue and not functional. It
  does not change any behavior in replication.
  
  
  The reporting on QUERY REPLNODE will display 0 objects
  replicated for each of the filespaces.
  
  This APAR can be identified by running following commands on the
  IBM Spectrum Protect
  
  server:
  
  1) remove replnode
  remove replnode NODE1 server=SERVER2
  ANR1629W REMOVE REPLNODE: This command will result in ending the
  replication relationship for all nodes that match the
  pattern NODE1. Replication will no longer be performed for the
  specified node(s).
  Do you wish to proceed? (Yes (Y)/No (N)) y
  ANR1631I REMOVE REPLNODE: Replication state information for the
  specified nodes have been removed.
  
  2) QUERY REPLNODE with a server that had previously been removed
  by REMOVE REPLNODE
  will show up in the output:
  q replnode NODE1 SERVER2
  Node Name           Type     Filespace Name      FSID
  Files on          Files on      Target Replica-
  
  Source            Target      tion Server
  
  Replication       Replication
  
  Server            Server
  ---------------     ----     ---------------     ----
  -------------     -------------     ---------------
  NODE1               Bkup     <filespace1>           1
  65,681                 0     SERVER2
  NODE1               Bkup     <filespace2>           2
       4                 0     SERVER2
  NODE1               Bkup     <filespace1>           3
      30                 0     SERVER2
  
  
  IBM Spectrum Protect Versions Affected:
  IBM Spectrum Protect Server 8.1.13 and above on all supported
  platforms
  
  Additional Keywords:
  Spectrum Protect; TSM; REMOVE REPLNODE; TS010944123
  

Local fix

• Execute commands below in IBM Spectrum Protect administrative
  command line:
  1) REMOVE REPLSERVER SERVER2
  
  2) DELETE SERVER SERVER2
  3) execute QUERY REPLNODE again. SERVER2 will not show up again
  in the REPLNODE output.
  

Problem summary

• ****************************************************************
  * USERS AFFECTED:                                              *
  * All IBM Storage Protect server users.                        *
  ****************************************************************
  * PROBLEM DESCRIPTION:                                         *
  * See error description.                                       *
  ****************************************************************
  * RECOMMENDATION:                                              *
  * Apply fixing level when available. This problem is currently *
  * projected to be fixed in level 8.1.27.100 and 8.2.0. Note    *
  * that this is subject to change at the discretion of IBM.     *
  ****************************************************************
  

Problem conclusion

• This problem was fixed.
  Affected platforms: AIX, Linux, and Windows.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  TSM SERVER

• Fixed component ID

  5698ISMSV

Applicable component levels