II12350: AVOID MRQ V3 LINKEDIT CC=004 AND FMQINSRT S0C1 ABEND

APAR status

• INTRAN

Error description

• If MRQ V3 was re-linked outside of SMP:
  1) link-edit will give condition code 004 and message-
    IEW2454W 9203 SYMBOL AIBTDLI UNRESOLVED.  NO AUTOCALL (NCAL) S
    2) FMQINSRT will ABEND with S0C1.
  

Local fix

• MRQ V2 did two linkedits to get the insert module
  (FMQINSRT) into the distribution library:
    1. to get the textdecks linked into a temporary library
       as FMQINSRT (with a linkedit error message saying AIBTDLI
       was not resolved).
    2. to pull the FMQINSRT module from the temporary library,
       and the AIBTDLI module from the IMS RESLIB into the
       permanent distribution library.
  The latest level of SMP does not allow multiple linkedits,
  so the second linkedit job was not shipped with MRQ V3.
  
  This situation required MRQ V2 to be re-linked after
  certain IMS maintenance was applied.
  The currently supported MRQ V3 does not need to be
  re-linked after IMS maintenance is applied.  MRQ V3
  uses the IMS AIB interface to avoid this necessity.
  DO NOT RE-LINK MRQ V3 OUTSIDE OF SMP.
  
    1) link-edit will give condition code 004 and message-
    IEW2454W 9203 SYMBOL AIBTDLI UNRESOLVED.  NO AUTOCALL (NCAL) S
    2) FMQINSRT will ABEND with S0C1.
    ** The quickest and easiest fix is to re-link FMQINSRT
       adding 'INCLUDE SYSLIB(AIBTDLI)' in the link-edit step.
  

Problem summary

Problem conclusion

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels