II08267: VIBTS - WIDEBAND TRANSMISSION FORMAT FOR SSP AND NTUNEMON APAR DOC. - SEE II11535 FOR THE NEW PROCEDURE TO SEND DOC. 12/98

APAR status

• Closed as canceled.

Error description

• NOTE: This process will be discontinued Jan. 1, 1999.  The
  new process utilizing NetView FTP (NvFTP) will replace the
    current WIDEBAND/IBTS process.  Please refer to II11535 for
    details for registering and using NvFTP and ensure that your
    co-ordinator has the proper NvFTP program and is registered
    for sending doc to the NCP support origanization.
  
  SSP      565504100 565400900 568606400 566533801 566428901
           566632201
  NCPMON   566533802 566428902
  NTUNEMON 564807700 564807701 564807702
  CCP      566428901 566533801
  WIDE BAND WIDEBAND
  THE PURPOSE OF THIS INFO APAR IS TO PROVIDE DESTINATION
  INFORMATION AND REQUESTED FORMATS TO BE USED WHEN TRANSMITTING
  DATA TO THE SSP CHANGE TEAM VIA THE 'VTAM INTEGRATED BULK
  TRANSMISSION SYSTEM'(VIBTS), ALSO KNOWN AS 'WIDEBAND' OR 'IBTS'.
  REQUIRED INFORMATION:
            NODE ID:   RDC
       NETWORK NAME:   USIBMSI1
               ATTN:   SSP WIDEBAND COORDINATOR
  ******
  JOB FILE CONTROL NUMBER : 4060 (RMJFNO=4060)
  ******
  REQUIRED FILE NAMES:
  --------------> xxxxxx.PMRyyyyy.Bzzz.Caaa.type
  WHERE:          xxxxxx IS SSPIBTS
                  yyyyy  IS PMR NUMBER (or APAR NUMBER)
                  zzz    IS THE B/O NUMBER
                  aaa    IS THE COUNTRY CODE
                  type   DESCRIBES THE FILE (eg. dump,trace,etc)
  *
  SEND 1 FILE PER TRANSMISSION.  WE CANNOT ACCEPT MULTIFILE
  FORMAT.
  *
  UNDER NO CIRCUMSTANCES USE FRP (FAITHFUL REPRODUCTION), OR
  DSS DUMP DATA SETS.
  *
  USE STANDARD LABEL TAPES.
  *
  **FAILURE TO FOLLOW ANY OF THESE GUIDELINES WILL RESULT IN
  **THE LOSS OF THE DATA SET.  IT IS RECOMMENDED THAT YOU
  **RETAIN A COPY OF THE DATA SET(S) FOR 15 DAYS FOLLOWING
  **TRANSMISSION TO ENSURE RECEIPT OF THE DATA BY THE
  **SUPPORT TEAMS.
  
  
  THE REQUESTED TAPE FORMAT FOR TRANSMISSION OF NCP DUMPS IS
  AS FOLLOWS:
  
     BLKSIZE:   512                  BLKSIZE:   2048
     LRECL  :   512    ** OR **      LRECL  :   2048
     RECFM  :   FB (OR F)            RECFM  :   FB (OR F)
  
  DUMP DATA SETS MUST USE THE FOLLOWING FORMAT:
  1)MVS - COPY THE OUTPUT FROM IFLREAD (SYSUT2) TO TAPE USING
          'IEBGENER'.  THE TAPE MUST BE UN-LABELED, AND THE
          DUMP MUST BE UN-FORMATTED.  BLOCKIZE,LRECL, & RECFM
          MUST BE AS PREVIOUSLY DESCRIBED.
  
  2)DOS - COPY THE OUTPUT FROM IFUREAD  (SYS008) TO TAPE USING
          'DITTO' OR EQUIVALENT.  THE TAPE MUST BE UN-LABELED
          AND THE DUMP UN-FORMATTED.  BLOCKSIZE, LRECL, & RECFM
          MUST BE AS PREVIOUSLY DESCRIBED.
  
  TRACE DATA SETS MUST USE THE FOLLOWING FORMAT :
  
        LRECL:  133
      BLKSIZE:  1330
        RECFM:  FBA
      DENSITY:  1600 OR 6250 BPI
  
  
  THIS INFORMATIONAL APAR IS PROVIDED AS PER THE D.O.U.
  SIGNED BY VARIOUS WIDEBAND FACILITY SITES.
  NOTE: TRANSMITTERS ARE ASKED TO RETAIN A COPY OF THEIR DATA
        SETS FOR 15 DAYS FOLLOWING TRANSMISSION OF THAT DATA.
  

Local fix

Problem summary

Problem conclusion

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels