II07783: VTAM V4R2 MIGRATION GUIDE DOCUMENTATION CHANGES.

APAR status

• Closed as canceled.

Error description

• VTAMINFO TPINFO 569511701 R201
  This information apar was created to contain the changes to the
  VTAM 4.2 Migration Guide manual.
  4.2 INFO APAR for the VTAM Migration Guide
  Writer: Barbara Wetmore
  
  Preface - About This Book
  
  No updates.
  
  Chapter 1. Planning to Upgrade VTAM V4R1 to VTAM V4R2
  
  No updates.
  
  Chapter 2. Planning to Upgrade VTAM V3R4.2 to VTAM V4R2
  
  No updates.
  
  Chapter 3. Planning to Upgrade VTAM V3R4.1 to VTAM V4R2
  
  No updates.
  
  Chapter 4. Planning to Upgrade VTAM V3R4 to VTAM V4R2
  
  No updates.
  
  Chapter 5. Planning to Upgrade VTAM V3R3 to VTAM V4R2
  
  No updates.
  
  Chapter 6. Upgrading VTAM V4R1 User Interfaces to VTAM V4R2
  
  On page 78, under "Changes to Defintion Statements," the
  following information has been added:
  
  TOPO=NONE on the PU definition statement in the local SNA,
  model, NCP, and switched major nodes is no longer valid.
  
  The valid range of values for the TGN operand on the PCCU
  definition statement in the NCP major node and the PU
  definition statement in the local SNA, NCP, and switched
  major nodes is now 0 through 20.
  
  On page 83, the following changed message has been added:
  
  V4R1:  IST1161I ACTIVE SSCP SESSIONS
  V4R2:  IST1161I SSCP SESSIONS
  
  Chapter 7. Upgrading VTAM V3R4.2 User Interfaces to VTAM V4R2
  
  On page 99, under "Changes to IBM-Supplied Default Tables,"
  information has been added to indicate that a new APPNCOS
  operand has been added to the MODEENT macroinstruction for
  all entries in the logon mode table.
  
  On page 109, under "Changes to Messages," and on
  page 113, under "Changes to Command Output," a section has
  been added that explains that when you issue a DISPLAY ID
  command for the following resources in VTAM V4R1 and you do
  not specify the network-qualified name of the resource, the
  network-qualfied name of the resource nonetheless appears
  in message IST075I in your display output:
  
      Application program
      Cross-domain resource
      Cross-domain resource manager
      LU.
  
  Chapter 8. Upgrading VTAM V3R4.1 Users Interfaces to VTAM V4R2
  
  On page 129, under "Changes to IBM-Supplied Default Tables,"
  information has been added to indicate that a new APPNCOS
  operand has been added to the MODEENT macroinstruction for
  all entries in the logon mode table.
  
  On page 140, under "Changes to Messages," and on
  page 147, under "Changes to Command Output," a section has
  been added that explains that when you issue a DISPLAY ID
  command for the following resources in VTAM V4R1 and you do
  not specify the network-qualified name of the resource, the
  network-qualfied name of the resource nonetheless appears
  in message IST075I in your display output:
  
      Application program
      Cross-domain resource
      Cross-domain resource manager
      LU.
  
  Chapter 9. Upgrading VTAM V3R4 User Interfaces to VTAM V4R2
  
  On page 163, under "Changes to IBM-Supplied Default Tables,"
  information has been added to indicate that a new APPNCOS
  operand has been added to the MODEENT macroinstruction for
  all entries in the logon mode table.
  
  Information has been added to the section on "Changes to
  Definition Statements" on page 165 showing that for the
  MAXBFRU operand on the HOST and LINE definition
  statements in the NCP and channel-attachment (NCP) major nodes,
  the value specified times the IOBUF buffer size value
  must now be less than 65535.
  
  On page 172, under "Changes to Messages," and on
  page 179, under "Changes to Command Output," a section has
  been added that explains that when you issue a DISPLAY ID
  command for the following resources in VTAM V4R1 and you do
  not specify the network-qualified name of the resource, the
  network-qualfied name of the resource nonetheless appears
  in message IST075I in your display output:
  
      Application program
      Cross-domain resource
      Cross-domain resource manager
      LU.
  
  Chapter 10. Upgrading VTAM V3R3 User Interfaces to VTAM V4R2
  
  On page 193, under "Changes to IBM-Supplied Default Tables,"
  information has been added to indicate that a new APPNCOS
  operand has been added to the MODEENT macroinstruction for
  all entries in the logon mode table.
  
  Information has been added to the section on "Changes to
  Definition Statements" on page 196 showing that for the
  MAXBFRU operand on the HOST and LINE definition
  statements in the NCP and channel-attachment (NCP) major nodes,
  the value specified times the IOBUF buffer size value
  must now be less than 65535.
  
  On page 204, under "Changes to Messages," and on
  page 211, under "Changes to Command Output," a section has
  been added that explains that when you issue a DISPLAY ID
  command for the following resources in VTAM V4R1 and you do
  not specify the network-qualified name of the resource, the
  network-qualfied name of the resource nonetheless appears
  in message IST075I in your display output:
  
      Application program
      Cross-domain resource
      Cross-domain resource manager
      LU.
  
  Chapter 11. Finding Descriptions of New Optional Functions and
              Enhancements
  
  No updates.
  
  Chapter 12. Learning About New Optional Functions and
              Enhancements
  
  On page 284, under "Extended Wildcard Enhancement," information
  has been added to indicate that you can use wildcard symbols
  only on the following commands:
  
       DISPLAY APPLS
       DISPLAY CDRMS
       DISPLAY CDRSCS
       DISPLAY CLSTRS
       DISPLAY GROUPS
       DISPLAY LINES
       DISPLAY RSCLIST
       DISPLAY TERMS
       DISPLAY TGPS
       DISPLAY TRACES.
  

Local fix

Problem summary

Problem conclusion

Temporary fix

Comments

• Info apar closed CAN for retention.
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels