II07719: VALID APAR CLOSING CODES USED BY CICS, AND THEIR MEANINGS

APAR status

• Closed as canceled.

Error description

• Closing codes are RETAIN specific and included in the RETAIN
  manual Software Support Facility Reference (ZZ25-6312).
  CAN (I) The record was cancelled, probably because it should
  never have been created or a customer requested that the record
  be cancelled.
  DOC (V) The problem was caused by an error in an IBM
  publication.
  DUA (I) The record was closed as a duplicate of another record
  that either:: - Had been closed for more than 10 days - Has a
  closing code other than PER, PRS, DOC, UR1 or UR3
  DUB (I) The record was closed as a duplicate of another record
  that both: - Had been closed for 10 days or fewer - Has a
  closing code of PER, PRS, DOC, UR1 or UR3
  DUU (I) The record was closed as a duplicate of an open record.
  FIN (I) Fixed IF next. There is a deficiency that we currently
  plan to fix if there is another release. This is not a
  commitment, but expresses our intention. 'Next Release' is not
  defined.
  MCH (I) The problem was caused by a hardware or microcode
  failure.
   OEM (V) IBM code is being changed in order to accommodate an
  OEM Vendor's code. OEM is used when IBM chooses to change IBM
  code that does not work properly with the Vendor's code. IBM
  code is in error.
  PER (V) A programming error was found and will be corrected in a
  future release.
  PRS (V) A programming error was found but will not be corrected.
  It is a permanent restriction.
  REQ (I) The suggestion proposed by the customer has been
  accepted as a requirement for the product.
  REQ meaning we have received a customer requirement is a
  replacement for SUG meaning we have received a customer
  suggestion. Both codes are available but some customers have a
  negative reaction to SUG.
  RET (I) The record was returned to the person who created it for
  more information.
  SUG (I) The record does not describe a programming error but
  recommends a change to the code.
  URx The change team either could not reproduce the problem or
  determined that the problem has already been corrected. "x" can
  be: 1. (V) The problem could not be reproduced on the next
  release to be available from ISMD. The release in the RREL field
  was supported at the time the APAR was received. 2. (I) The
  problem could not be reproduced on the next release to be
  available from ISMD. The release in the RREL field was not
  supported at the time the APAR was received. 3. (V) The problem
  could not be reproduced on a currently supported release. The
  release in the RREL field was supported at the time the APAR was
  received. 4. (I) The problem could not be reproduced on a
  currently supported release. The release in the RREL field was
  not supported at the time the APAR was received. 5. (I) The
  problem could not be reproduced on the same release level on
  which the problem originally occurred.
  USE (I) The problem was cause by a user error.
  Note: Those closing codes which are considered valid for
  measurement purposes are identified by (V) . Closing codes
  considered invalid for measurement purposes are identified by
  (I) .
  

Local fix

Problem summary

Problem conclusion

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels