HE10521: Performance and memory usage of Swept volume is bad.

APAR status

• Closed as Permanent restriction.

Error description

• ABSTRACT:
  Performance and memory usage of Swept volume is bad.
  Scenario :
  .
  Scenario:
  1.Use attached CATReference and CATSettings
  2.Start CATIA V5R20SP4
  3.Open Scenario.CATProduct and change to DMU Kinematics
  4.Select Swept volume command.
  5.Select Silhouette, Apply Wrapping 1mm, Apply Simplification 1m
  m and Offset ratio 0.00, then select Preview button.
      >>> It takes too much time for computation.
  Result:
  Performance and memory usage of Swept volume is very bad.
  Expected result:
  Performance and memory usage of Swept volume should is Improve m
  ore (Time taken to perfom should be less).
  

Local fix

• empty
  

Problem summary

• ABSTRACT:
  Performance and memory usage of Swept volume is bad.
  Scenario :
  .
  Scenario:
  1.Use attached CATReference and CATSettings
  2.Start CATIA V5R20SP4
  3.Open Scenario.CATProduct and change to DMU Kinematics
  4.Select Swept volume command.
  5.Select Silhouette, Apply Wrapping 1mm, Apply Simplification
  1mm and Offset ratio 0.00, then select Preview button.
      >>> It takes too much time for computation.
  Result:
  Performance and memory usage of Swept volume is very bad.
  Expected result:
  Performance and memory usage of Swept volume should is
  Improve more (Time taken to perfom should be less).
  

Problem conclusion

• THIS PROBLEM IS PERMANENT RESTRICTION IN Realistic Simulation
  Additional Closure Information:
  Incident Diagnosis:
  Performance and memory usage of Swept volume is bad.
  Reason:
  The time taken to generate the output of the Swept Volume
  purely depends on,
  1) The size/complexity of the data model in terms of number
  of triangles
  2) The length/complexity of the track along which the input
  data is moved
  By-Pass:
  Possible BY-PASS is mentioned in the attached closure
  explanation document.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels