HE10288: When Remove command is cancelled, CATIA Loops

APAR status

• Closed as program error.

Error description

• Scenario:
  1. Open the CATPart in CATIA: Part design workbench.
  2. From contextual menu > object of Body.2 select Remove.
  3. In the resulting "remove" dialog, click on cancel.
  Problem:
  CATIA goes into a loop and hangs.
  Expected Result:
  CATIA should not hang and the operation should be cancelled smoo
  thly.
  

Local fix

• empty
  

Problem summary

• Scenario:
  1. Open the CATPart in CATIA: Part design workbench.
  2. From contextual menu > object of Body.2 select Remove.
  3. In the resulting "remove" dialog, click on cancel.
  Problem:
  CATIA goes into a loop and hangs.
  Expected Result:
  CATIA should not hang and the operation should be cancelled
  smoothly.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION V5-6R2012 GA
  level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R21 SP2.
  Additional Closure Information:
  Incident Diagnosis:
  When Remove command is canceled, CATIA Loops
  Technical explanation of the defect:
  Problem with 3d refresh and regression due to correction on
  some other issue.
  Technical explanation of the correction:
  Issue occured due to a correction handed on a separate case
  which had a side effect with undo-redo operations, which
  introduced 3D refresh performance regresion. This issue has
  now been corrected.
  Possible by-pass and/or correction limitation:
  Issue cannot be corrected on R20 levels since the level has
  already been closed.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R520 PSN

     UP