HE09030: If the axis element of "Axis System" is selected again, CATIA wi ll set up unnecessary constraint in the direction which has not

APAR status

• Closed as program error.

Error description

• Scenario :
  1. Open the CATPart in CATIA Part Design W/b.
  2. From contextual menu of plane P1 select Replace and then sele
  ct Plane P2 to replace it.
  3. Click on close in the update diagnosis window.
  4. Select Replace on plane P3 and select plane P4 to replace it.
  5. Observe the axis system on 3D space.
  Problem:
  The Y axis of the axis system shifts its position in 3D space.
  Expected Result:
  The Y axis of the axis system should not shift its position in 3
  D space.
  

Local fix

• empty
  

Problem summary

• Scenario :
  1. Open the CATPart in CATIA Part Design W/b.
  2. From contextual menu of plane P1 select Replace and then
  select Plane P2 to replace it.
  3. Click on close in the update diagnosis window.
  4. Select Replace on plane P3 and select plane P4 to replace
  it.
  5. Observe the axis system on 3D space.
  Problem:
  The Y axis of the axis system shifts its position in 3D space.
  Expected Result:
  The Y axis of the axis system should not shift its position
  in 3D space.
  

Problem conclusion

• NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R21 SP3.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5-6R2012 SP1.
  Additional Closure Information:
  Incident Diagnosis :
  If the axis element of "Axis System" is selected again, CATIA
  will set up unnecessary constraint in the direction which has
  not been selected.
  Correction Explanation :
  Selection order is not set for default computed direction to
  resolve this issue.Issue is fixed now.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R520 PSN

     UP