HE08528: PART : WITH MD2 LICENSES, EDGE FILLET CREATED WITH BLEND CORNER CANNOT BE EDITED

APAR status

• Closed as program error.

Error description

• Scenario:
  1. Start CATIA V5 with MD2 license and create open an empty
  CATPart.
  2. Create a rectangle geometry and create Pad using it.
  3. Create a Blend Corner  with "Create by vertex". > Blend
  corner is created..
  4. Double click the EdgeFillet to modify the Blend corner.
  Following Warning message will be displayed
  ---------------------------
  Warning
  ---------------------------
  You will have a limited use of this feature.
  A Cast & Forged Part Optimizer(CFO) product license or
  Mechanical Design 2 Configuration(MD2) is Required For Blend
  Corner(s) and Setback Distance options.
  ---------------------------
  OK
  .
  Expected result:
  Unnecessary warning message should not be displayed.
  .
  

Local fix

• empty
  

Problem summary

• Scenario:
  1. Start CATIA V5 with MD2 license and create open an empty
  CATPart.
  2. Create a rectangle geometry and create Pad using it.
  3. Create a Blend Corner  with "Create by vertex". > Blend
  corner is created..
  4. Double click the EdgeFillet to modify the Blend corner.
  Following Warning message will be displayed
  ---------------------------
  Warning
  ---------------------------
  You will have a limited use of this feature.
  A Cast & Forged Part Optimizer(CFO) product license or
  Mechanical Design 2 Configuration(MD2) is Required For Blend
  Corner(s) and Setback Distance options.
  ---------------------------
  OK
  .
  Expected result:
  Unnecessary warning message should not be displayed.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA  VERSION V5R22 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP7.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R21 SP2.
  Additional Closure Information:
  Incident Diagnosis:
  With MD2 licenses, Edge fillet created with blend corner
  cannot be edited.
  Correction explanation:
  Correct licensing checks now put in place for Fillet Edit.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CAA V5 NT>XP

• Fixed component ID

  569151100

Applicable component levels