HE08230: ASSEMBLY: EXPORT PROBLEM THE CGR IS NOT CONVERTED INTO 3DXML AND THE STEP FILE HAS NO EXTERNAL REFERENCE TO THE 3DXML FILE

APAR status

• Closed as program error.

Error description

• Scenario
  Licenses required:MD2+ST1+SXT
  1. Launch CATIA V5
  2. Create a new product ?Product1?
  3. Insert -> Existing Component (click on ?Product1?)
  4. Select  *.cgr (attached)
  5. Go To Tools / Option Click on ?STEP? sheet
  6. In STEP/ Export area, select ?AP214? as Application
  Protocol (AP)
  7. In STEP/ Export area, select ?Global nested assembly? for
  assemblies
  8. Click on ?OK? button, Tools option panel exits
  9. Select File-> SaveAs, select ?stp? for  ?Save as type?,
  Result:
   .stp file is not generated correctly. It does not point to
  .3dxml file. .3dxml file is not generated
  Expected result and remarks
  This scenario should:
  - Create .stp file with a link to .3dxml file
  - Create .3dxml file associated to .cgr file
  

Local fix

• empty
  

Problem summary

• Scenario
  Licenses required:MD2+ST1+SXT
  1. Launch CATIA V5
  2. Create a new product ???Product1???
  3. Insert -> Existing Component (click on ???Product1???)
  4. Select  *.cgr (attached)
  5. Go To Tools / Option Click on ???STEP??? sheet
  6. In STEP/ Export area, select ???AP214??? as Application
  Protocol (AP)
  7. In STEP/ Export area, select ???Global nested assembly??? for
  
  assemblies
  8. Click on ???OK??? button, Tools option panel exits
  9. Select File-> SaveAs, select ???stp??? for  ???Save as type??
  ?,
  Result:
   .stp file is not generated correctly. It does not point to
  .3dxml file. .3dxml file is not generated
  Expected result and remarks
  This scenario should:
  - Create .stp file with a link to .3dxml file
  - Create .3dxml file associated to .cgr file
  

Problem conclusion

• THIS PROBLEM HAS BEEN FIXED ON V5R22 GA.
  THIS PROBLEM HAS BEEN FIXED ON V5R20 SP7.
  THIS PROBLEM HAS BEEN FIXED ON V5R21 SP2.
  Additional Closure Information:
  Technical explanation of the defect:
  Export STEP+3DXML KO on a V5R20 installation with ST1.
  Technical explanation of the correction:
  The software component for the translation from CGR to 3DXML
  was not available in the customer configuration. A copy of
  this component was done in a STEP FW so that the scenario
  works on the customer configuration.
  Set this variable CATDXImpExpStepWith3dxml=1 in order to get
  the correction.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R520 PSN

     UP