HE06342: BILL OF MATERIAL STYLE NOT CORRECT AFTER FORCE UPDATE

APAR status

• Closed as program error.

Error description

• Scenario:
  1. Open the CATPart and CATDrawing in CATIA.
  2. Insert > Generation > BoM > Advanced BoM.
  3. Click on the view and then select a customized BoM style
  and click on OK.
  4. Click anywhere on the sheet to generate a BoM.
  5. Execute step 2 again.
  6. Click on the part from 3D space and then click anywhere on
  the sheet after selecting the same BoM
       style.
  7. Execute c:force update from the power input.
  Problem:
  The BoM generated from 3D part, changes its style.
  Expected Result:
  The Bill of Material should not change its style after force
  update. It should be same as one generated from the drawing.
  

Local fix

• empty
  

Problem summary

• Scenario:
  1. Open the CATPart and CATDrawing in CATIA.
  2. Insert > Generation > BoM > Advanced BoM.
  3. Click on the view and then select a customized BoM style
  and click on OK.
  4. Click anywhere on the sheet to generate a BoM.
  5. Execute step 2 again.
  6. Click on the part from 3D space and then click anywhere on
  the sheet after selecting the same BoM
       style.
  7. Execute c:force update from the power input.
  Problem:
  The BoM generated from 3D part, changes its style.
  Expected Result:
  The Bill of Material should not change its style after force
  update. It should be same as one generated from the drawing.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON V5R22 GA LEVEL
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP7.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R21 SP01.
  Additional Closure Information:
  Incident Diagnosis:
  Bill of Material style not correct after force update
  Technical explanation of the defect:
  In some cases, the table representing the BOM needs to be
  refreshed to show the latest
  modifications.
  Technical explanation of the correction:
  The table refresh is done before exiting the BOM creation
  command.
  Possible by-pass and/or correction limitation:
  NA
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R520 PSN

     UP