HE06201: CATIA CRASHES WITH CLICK OK TO TERMINATE MESSAGE WHILE RUNNING T HE SIMULATION WITH LAWS COMMAND

APAR status

• Closed as program error.

Error description

• ABSTRACT:
  CATIA crashes with Click ok to terminate message while
  running the "Simulation with laws" command.
  .
  SCENARIO
  1) Start CATIA V5  DMU Kinematics workbench
  2) Set Tools/Option/infrastructure\Cache Management\Work with
  the Cache system
  3) Open "Test.CATProduct"
  4.Select the Update positions command.
  -Since the Product was loaded in cache mode,a message is
  prompted informing user that more files would be loaded to
  complete this operation.
  5.Click "OK" on this message prompt.
  6.Select the "Simulation with laws" command.
  -Click ok to terminate message pops up and the CATIA session
  crashes.
  .
  This is the problem.
  Result
  CATIA crashes with Click ok to terminate message while
  running the Simulation with laws command.
  Expected Result
  CATIA Should not crashes while running the Simulation with
  laws command.
  

Local fix

• empty
  

Problem summary

• ABSTRACT:
  CATIA crashes with Click ok to terminate message while
  running the "Simulation with laws" command.
  .
  SCENARIO
  1) Start CATIA V5  DMU Kinematics workbench
  2) Set Tools/Option/infrastructure\Cache Management\Work with
  the Cache system
  3) Open "Test.CATProduct"
  4.Select the Update positions command.
  -Since the Product was loaded in cache mode,a message is
  prompted informing user that more files would be loaded to
  complete this operation.
  5.Click "OK" on this message prompt.
  6.Select the "Simulation with laws" command.
  -Click ok to terminate message pops up and the CATIA session
  crashes.
  .
  This is the problem.
  Result
  CATIA crashes with Click ok to terminate message while
  running the Simulation with laws command.
  Expected Result
  CATIA Should not crashes while running the Simulation with
  laws command.
  

Problem conclusion

• NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP7.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R21 SP2.
  Additional Closure Information:
  Technical explanation of the defect:
  Problem corrected. And the number of command is set to 200.
  Technical explanation of the correction:
  maximum 200 commands are now supported for any model in V5.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R520 PSN

     UP