HE05597: MASS CALCULATION IS WRONG ON A PRODUCT WITH PARTS THAT CONTAIN D EACTIVATED FEATURES

APAR status

• Closed as program error.

Error description

• ABSTRACT:
  Mass Calculation is wrong on a product with parts that
  contain deactivated features.
  .
  SCENARIO:
  1. Launch CATIA V5R20Sp4.
  2. Open file TestProduct.CATProduct" in Assembly w\b
  3. Select "Measure Inertia" icon.
  4. Select "Test 1.CATPart" measure Mass Error window is shown
  5. Select "Test 2.CATPart" measure Mass.
  6. Select "Test 3.CATPart" measure Mass.
  7. Select "Test 4.CATPart" measure Mass.
  8  Select "Measure Inertia" icon.
  9. Select "Test.CATProduct" to measure entire PartBody.
  Record Mass the Result before split.
  RESULT:
  Mass Calculation is wrong on a product with parts that
  contain deactivated features.
  .
  EXPECTED RESULT:
  Mass Calculation is should be correct on a product with parts
  that contain deactivated features
  

Local fix

• empty
  

Problem summary

• ABSTRACT:
  Mass Calculation is wrong on a product with parts that
  contain deactivated features.
  .
  SCENARIO:
  1. Launch CATIA V5R20Sp4.
  2. Open file TestProduct.CATProduct" in Assembly w\b
  3. Select "Measure Inertia" icon.
  4. Select "Test 1.CATPart" measure Mass Error window is shown
  5. Select "Test 2.CATPart" measure Mass.
  6. Select "Test 3.CATPart" measure Mass.
  7. Select "Test 4.CATPart" measure Mass.
  8  Select "Measure Inertia" icon.
  9. Select "Test.CATProduct" to measure entire PartBody.
  Record Mass the Result before split.
  RESULT:
  Mass Calculation is wrong on a product with parts that
  contain deactivated features.
  .
  EXPECTED RESULT:
  Mass Calculation is should be correct on a product with parts
  that contain deactivated features
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON I-PLM Collaborative Innovation
  VERSION V5R21 SP1 level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP6.
  Additional Closure Information:
  Incident Diagnosis:
  Mass Calculation is wrong on a product with parts that
  contain deactivated features.
  
  Technical explanation of the correction:
  There was a problem while filtering the de-activated
  features, thus not being considered for inertia computations
  even if some of the features are active inside a body.The
  problem is fixed.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R520 PSN

     UP