HE02895: OPENING A SOLIDWORKS ASSEMBLY TAKES MUCH MORE TIME WHEN THE SMAR TEAM ADD-IN IS LOADED.

APAR status

• Closed as unreproducible in next release.

Error description

• Scenario:
  1. Have a big Assembly Checked In.
      Assembly have many levels.
  2. Do Check Out to Assembly with Propagate Operation to all
  components.
  3. Open SolidWorks and Login SMARTEAM. Open Assembly in
  SolidWorks.
      ==> Measure time for open is reasonable (e.g. 30 sec).
  4. Check In Assembly and all components.
  5. Do Open for Edit to some Parts. Modify Parts with
  SolidWorks.
  6. Check In Part and do: Overwrite Previous Revision.
  7. Select Assembly and do Check Out.
      ==> Keep all components as Copy operation.
  8. Open Assembly in SolidWorks.
  ==> KO: Time to open Assembly is not accepted.
                It may take now about 2 minutes.
                This is about 400% overhead vs. Assembly with
  no Modified parts.
  Notice: Because of steps #5 and #6 Assembly consists with
  many Modified Components.
              All Sub-Assemblies are open as Read-Only however
  they have modified Parts.
              Open dialog: Show Modified Components and see a
  very long list of modified components.
  The more Modified Components you have in list, the longer it
  takes to open Assembly.
  Expected: Overhead for this scenario should not be that much.
                   If Assembly consists with hundreds of
  Sub-Assemblies / Parts and can get up to 600% overhead.
                   This is not accepted by Customer.
  

Local fix

• empty
  

Problem summary

• Scenario:
  1. Have a big Assembly Checked In.
      Assembly have many levels.
  2. Do Check Out to Assembly with Propagate Operation to all
  components.
  3. Open SolidWorks and Login SMARTEAM. Open Assembly in
  SolidWorks.
      ==> Measure time for open is reasonable (e.g. 30 sec).
  4. Check In Assembly and all components.
  5. Do Open for Edit to some Parts. Modify Parts with
  SolidWorks.
  6. Check In Part and do: Overwrite Previous Revision.
  7. Select Assembly and do Check Out.
      ==> Keep all components as Copy operation.
  8. Open Assembly in SolidWorks.
  ==> KO: Time to open Assembly is not accepted.
                It may take now about 2 minutes.
                This is about 400% overhead vs. Assembly with
  no Modified parts.
  Notice: Because of steps #5 and #6 Assembly consists with
  many Modified Components.
              All Sub-Assemblies are open as Read-Only however
  they have modified Parts.
              Open dialog: Show Modified Components and see a
  very long list of modified components.
  The more Modified Components you have in list, the longer it
  takes to open Assembly.
  Expected: Overhead for this scenario should not be that much.
                   If Assembly consists with hundreds of
  Sub-Assemblies / Parts and can get up to 600% overhead.
                   This is not accepted by Customer.
  

Problem conclusion

• THE PROBLEM WAS SUBMITTED ON :
      I-PLM Collaborative Innovation VERSION V5R19.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  I-PLM Collaborative Innovation VERSION V5R20 SP7.
  I-PLM Collaborative Innovation VERSION V5R21 SP2.
  Additional Closure Information:
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  SMARTEAM NT>XP

• Fixed component ID

  569199970

Applicable component levels

• R520 PSN

     UP