HE00488: MEASURE IS NOT UPDATED DURING KINEMATIC SIMULATION

APAR status

• Closed as unreproducible in next release.

Error description

• ABSTRACT:
  Measure is not updated during Kinematic Simulation
  SCENARIO:
  1. Start CATIA V5 (on DMU Kinematics Workbench)
  
  2. Open the CATProduct
  
  3. Run "Simulation with commands"
  
  4. Click on "Activate Sensors"
  
  5. Activate sensors on the 2 Max distance measures.
  
  6. Without closing the Sensors window, click on "More" on the
  "Kinematics simuation window
  
  7. Click on "On request"
  
  8. Shift the "Command.1" value to 0
  
  9. Click on Play
  RESULT:
  MeasureBetween.1 is not updating (Measure between lines).
  EXPECTED RESULT:
  Both measures should be updated.
  

Local fix

• empty
  

Problem summary

• ABSTRACT:
  Measure is not updated during Kinematic Simulation
  SCENARIO:
  1. Start CATIA V5 (on DMU Kinematics Workbench)
  
  2. Open the CATProduct
  
  3. Run "Simulation with commands"
  
  4. Click on "Activate Sensors"
  
  5. Activate sensors on the 2 Max distance measures.
  
  6. Without closing the Sensors window, click on "More" on the
  "Kinematics simuation window
  
  7. Click on "On request"
  
  8. Shift the "Command.1" value to 0
  
  9. Click on Play
  RESULT:
  MeasureBetween.1 is not updating (Measure between lines).
  EXPECTED RESULT:
  Both measures should be updated.
  

Problem conclusion

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION V5R18.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION V5R21 GA level.
  CATIA VERSION V5R20 SP4.
  CATIA VERSION V5R19 SP9.
  Additional Closure Information:
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R520 PSN

     UP