HD99905: ISO DRAWING IS NOT DISPLAYED AFTER PCF FILE HAS BEEN GENERATED

APAR status

• Closed as program error.

Error description

• Prerequisites :
  - start I-configure
  - under your project select Final-Basic
  - select the Drawing folder
  - for Output Format value select smart DWG (DWG)
  - export your settings (file / export)
  Scenario :
  - start CV5
  - make sure your project is referenced in Tools / Options
  - go to Piping workbench
  - route a run (any run)
  - place a pipe on this run (any pipe)
  - use "Generate ISO ..." command
  - select line ID and tick "display ISO drawing"
  Result : pcf and dwg are generated, but drawing is not
  displayed and an error message appears : "IRunNotFound"
  Expected Result: The drawing should be generated.
  

Local fix

• empty
  

Problem summary

• Prerequisites :
  - start I-configure
  - under your project select Final-Basic
  - select the Drawing folder
  - for Output Format value select smart DWG (DWG)
  - export your settings (file / export)
  Scenario :
  - start CV5
  - make sure your project is referenced in Tools / Options
  - go to Piping workbench
  - route a run (any run)
  - place a pipe on this run (any pipe)
  - use "Generate ISO ..." command
  - select line ID and tick "display ISO drawing"
  Result : pcf and dwg are generated, but drawing is not
  displayed and an error message appears : "IRunNotFound"
  Expected Result: The drawing should be generated.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON Virtual Design  VERSION V5R21
  GA level.
  Additional Closure Information:
  Technical explanation of the defect:
  While opening the drawing file only the file having .dxf
  extension is considered. In order to open file having .dwg
  extension the code should be modified.
  Technical explanation of the correction:
  The corresponding code is modified in order to open the file
  having extension .dwg.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R521 PSN

     UP