HD99801: ISOGEN DOES NOT DISPLAY PARTS WITH SAME ITEM CODE BUT DIFFERENT OTHER ATTRIBUTES

APAR status

• Closed as program error.

Error description

• 1. Start CATIA V5 R19Sp8 and go to Piping workbench
  2. Create a Run (use U1-P101-2in-CS150R-FG for example)
  3. Place a Flange on the Run (use FLANGE-WN-RFBW-150-2in for
  instance)
  4. Place another Flange on the Run (use
  FLANGE-WN-RFBW-300-2in for instance). Rating has to be
  different.
  5. Place a pipe on the run
  6. Generate ISO (Select the Line ID to generate the ISO).
  Check mark ?Display ISO drawing?
  Concern: Only one row of Flange is displayed in the Material
  List in the drawing with Quantity as 4 (4 since two Flanges
  are automatically added when a pipe is placed.)
  Expected Result: When the ITEM CODE of the parts is same
  however, the attributes (like Size, Rating, Material,
  Schedule,) are different, each part should be displayed in a
  separate row.
  

Local fix

• empty
  

Problem summary

• 1. Start CATIA V5 R19Sp8 and go to Piping workbench
  2. Create a Run (use U1-P101-2in-CS150R-FG for example)
  3. Place a Flange on the Run (use FLANGE-WN-RFBW-150-2in for
  instance)
  4. Place another Flange on the Run (use
  FLANGE-WN-RFBW-300-2in for instance). Rating has to be
  different.
  5. Place a pipe on the run
  6. Generate ISO (Select the Line ID to generate the ISO).
  Check mark ???Display ISO drawing???
  Concern: Only one row of Flange is displayed in the Material
  List in the drawing with Quantity as 4 (4 since two Flanges
  are automatically added when a pipe is placed.)
  Expected Result: When the ITEM CODE of the parts is same
  however, the attributes (like Size, Rating, Material,
  Schedule,) are different, each part should be displayed in a
  separate row.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON Virtual Design  VERSION V5R21
  GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R19 SP9.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP4.
  Additional Closure Information:
  This fix is available under a Flag
  Technical explanation of the defect:
  In the ISO drawing entries in the "Material List Table"
  depend on the Item Code attribute value in the Catia
  Component. In order to differentiate the Item Code attribute
  value, depending on the other Material attributes (e.g
  Rating, MaterialCode, Schedule etc.) the pcf writting code
  should be modified.
  Technical explanation of the correction:
  Now the code is modified so that the ITEM_CODE attribute is
  written in the pcf by considering the values of other
  Mateiral attributes (e.g Rating, MaterialCode, Schedule
  etc.). Now the parts with same ITEM CODE but different other
  Mateiral attributes are displayed in the drawing in the
  "Material List Table".
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN

     UP