HD98873: SOLIDWORKS 2010 INTEGRATION IS NOT CORRECTLY INSTALLED

APAR status

• Closed as unreproducible in next release.

Error description

• The integration with Solidworks is not installed properly, SW
  calls a wrong DLL (see attached picture).
  On the same machine, we also have CATIA installed and there
  the integration works perfectly.
  THE DEFECT OPENED FOR TWO INSTALLATION SCENARIOS for ENOVIA
  SmarTeam V5 / V5R19 SP8 / WIN XP SP2 / ORACLE-10.2.0.2
  The problem is with SolidWorks 2010 - Integration (32-Bit)
  for only such was certified with V5R19 SP8
  Note: on both scenarios only SW2010SP1 installed on clean
  client XP 32 Bit computer, and never SW2009 was installed
  Scenario 1:
  - On a Windows XP SP2 workstation
  - Install SolidWorks 2010SP1
  - Install SmarTeam V5R19GA (Editor - Role) with NO SolidWorks
  Integration
  . (Manually deactivated "SMARTEAM - SW Integration")
  - Install SP8 for SmarTeam V5R19
  - activate the SolidWorks - Integration via 'Add or Remove
  Programs'
  . - sel 'SMARTEAM - Editor' -> "Change"
  . - Sel "Next"
  . - Sel 'Modify' and "Next"
  . - Below 'SMARTEAM Integrations', activate the "SMARTEAM -
  SW Integration" and select "Next" to Install the integration.
  But when starting SolidWorks after the
  installation/modification has finished, the Integration still
  points to 'sldautotraceu.dll' on my side and no integration
  file
  "SmarTeam.Std.Integration.SolidWorks.dll" has been copied to
  the ...\SMARTEAM\Bin directory.
  - On Windows XP SP2
  - Install SolidWorks 2010 SP1
  - Install Smarteam Editor V5R19 (Editor - Role) GA
  -> SW-Integration is available and points to
  "...\SMARTEAM\Bin\SmWorks.dll"
  - Install SP8 for V5R19
  -> Integration is no longer available!!
  As shown in the attachached video file, the integration
  points on my side to the following dll:
  ...\sldautotraceu.dll (SolidWorks - DLL) where it is expected
  to point to "SmarTeam.Std.Integration.SolidWorks.dll".
  

Local fix

• empty
  

Problem summary

• The integration with Solidworks is not installed properly, SW
  calls a wrong DLL (see attached picture).
  On the same machine, we also have CATIA installed and there
  the integration works perfectly.
  THE DEFECT OPENED FOR TWO INSTALLATION SCENARIOS for ENOVIA
  SmarTeam V5 / V5R19 SP8 / WIN XP SP2 / ORACLE-10.2.0.2
  The problem is with SolidWorks 2010 - Integration (32-Bit)
  for only such was certified with V5R19 SP8
  Note: on both scenarios only SW2010SP1 installed on clean
  client XP 32 Bit computer, and never SW2009 was installed
  Scenario 1:
  - On a Windows XP SP2 workstation
  - Install SolidWorks 2010SP1
  - Install SmarTeam V5R19GA (Editor - Role) with NO SolidWorks
  Integration
  . (Manually deactivated "SMARTEAM - SW Integration")
  - Install SP8 for SmarTeam V5R19
  - activate the SolidWorks - Integration via 'Add or Remove
  Programs'
  . - sel 'SMARTEAM - Editor' -> "Change"
  . - Sel "Next"
  . - Sel 'Modify' and "Next"
  . - Below 'SMARTEAM Integrations', activate the "SMARTEAM -
  SW Integration" and select "Next" to Install the integration.
  But when starting SolidWorks after the
  installation/modification has finished, the Integration still
  points to 'sldautotraceu.dll' on my side and no integration
  file
  "SmarTeam.Std.Integration.SolidWorks.dll" has been copied to
  the ...\SMARTEAM\Bin directory.
  - On Windows XP SP2
  - Install SolidWorks 2010 SP1
  - Install Smarteam Editor V5R19 (Editor - Role) GA
  -> SW-Integration is available and points to
  "...\SMARTEAM\Bin\SmWorks.dll"
  - Install SP8 for V5R19
  -> Integration is no longer available!!
  As shown in the attachached video file, the integration
  points on my side to the following dll:
  ...\sldautotraceu.dll (SolidWorks - DLL) where it is expected
  to point to "SmarTeam.Std.Integration.SolidWorks.dll".
  

Problem conclusion

• THE PROBLEM WAS SUBMITTED ON :
      I-PLM Collaborative Innovation VERSION V5R19.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  I-PLM Collaborative Innovation VERSION V5R21 GA level
  I-PLM Collaborative Innovation VERSION V5R20 SP4.
  Additional Closure Information:
  -
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  SMARTEAM NT>XP

• Fixed component ID

  569199970

Applicable component levels

• R520 PSN

     UP