HD98767: DRAFTING: WRONG UPDATE RESULT OF AUXILIARY VIEW WHEN THE OPTION "AUXILIARY AND SECTION VIEWS ORIENTATION ACCORDING TO PROFILE" I

APAR status

• Closed as program error.

Error description

• 1. Start CATIA V5
  2. Create a CATPart with some geometry
  3. Create a Drawing view of this CATPart in the Drafting
  Workbench.
  4. Activate the check box "Auxiliary and Section views
  orientation according to profile" in Tools -> Options ->
  Mechanical Design -> Drafting -> Layout
  5. Create Auxiliary view from the above created view.
  6. Modify the angle of the Auxiliary line.
  7. Update the Auxiliary View
  .
  Observation:
  The view geometry is updated but the Auxiliary View is not
  changed/aligned according to the change of the line angle.
  .
  Expected result:
  The View should be aligned after the change in angle of the
  Line.
  

Local fix

• empty
  

Problem summary

• 1. Start CATIA V5
  2. Create a CATPart with some geometry
  3. Create a Drawing view of this CATPart in the Drafting
  Workbench.
  4. Activate the check box "Auxiliary and Section views
  orientation according to profile" in Tools -> Options ->
  Mechanical Design -> Drafting -> Layout
  5. Create Auxiliary view from the above created view.
  6. Modify the angle of the Auxiliary line.
  7. Update the Auxiliary View
  .
  Observation:
  The view geometry is updated but the Auxiliary View is not
  changed/aligned according to the change of the line angle.
  .
  Expected result:
  The View should be aligned after the change in angle of the
  Line.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION V5R21 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R19 SP9.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP4.
  Additional Closure Information:
  INCIDENT DIAGNOSIS:
  Wrong update result of Auxiliary View when the option
  "Auxiliary and Section views orientation according to
  profile" in Tools -> Options -> Mechanical Design -> Drafting
  -> Layout  is activated.
  CORRECTION DETAILS:
  Incorrect algorithm was called. The issue is now rectified
  and the result is correct.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN

     UP