HD96168: MEASURE INERTIA: CONTENT & PARAMETERS IN THE TREE, EDIT WINDOW & F(X) ARE DIFFERENT

APAR status

• Closed as fixed if next.

Error description

• ABSTRACT:
  Measure Inertia: Content & Parameters in the tree, edit
  window & f(x) are different.
  .
  SCENARIO:
  1. Launch CATIA V5R19SP5 & Go to
  Tools/Options/General/Parameter and Measure and then select
  "With value" & "With formula".
  2. Create new part with Enable Hybrid design.
  3. Create a sketch & extrude it.
  4. Use measure inertia select the Part Body.
  5. Select Keep Measure & in customize; select only Area,
  Volume, Density & Mass.
  6. Since only surface is created , InertiaSurface.1 displayed
  with Area, Surface Mass & Mass values. Click OK.
  7. Now go to Part design workbench & modify the contents of
  Part Body by adding thickness to create a solid.
  8. Update the Inertia Surface.1. we see there is difference
  between Displayed parameters in the tree & parameters in the
  Edit window for measure inertia (with double click
  InertiaSurface.1 ), Volume parameter is added in edit window
  but in tree & also f(x) we don?t have Volume parameter ? This
  is the problem.
  9. Now create a new inertia measurement (InertiaVolume.1) by
  selecting the Part body (Area, Volume, Density & Mass
  parameters appear in tree).
  10. Delete the contents of the Part body & update the
  InertiaVolume.1 , the Volume values in the tree are not
  changing to zero - This is the problem.
  .
  RESULT:
  All the parameters (especially Volume in this case) in the
  Specification tree, Edit window & in f(x) for measured
  inertia properties are not same & do not represent
  updated/modified correct values of these parameters at any
  moment.
  EXPECTED RESULT:
  All the parameters (especially Volume in this case) in the
  Specification tree, Edit window & in f(x) for measured
  inertia properties should be same & represent
  updated/modified correct values of these parameters at any
  moment.
  

Local fix

• empty
  

Problem summary

• ABSTRACT:
  Measure Inertia: Content & Parameters in the tree, edit
  window & f(x) are different.
  .
  SCENARIO:
  1. Launch CATIA V5R19SP5 & Go to
  Tools/Options/General/Parameter and Measure and then select
  "With value" & "With formula".
  2. Create new part with Enable Hybrid design.
  3. Create a sketch & extrude it.
  4. Use measure inertia select the Part Body.
  5. Select Keep Measure & in customize; select only Area,
  Volume, Density & Mass.
  6. Since only surface is created , InertiaSurface.1 displayed
  with Area, Surface Mass & Mass values. Click OK.
  7. Now go to Part design workbench & modify the contents of
  Part Body by adding thickness to create a solid.
  8. Update the Inertia Surface.1. we see there is difference
  between Displayed parameters in the tree & parameters in the
  Edit window for measure inertia (with double click
  InertiaSurface.1 ), Volume parameter is added in edit window
  but in tree & also f(x) we don???t have Volume parameter ??? Thi
  s
  is the problem.
  9. Now create a new inertia measurement (InertiaVolume.1) by
  selecting the Part body (Area, Volume, Density & Mass
  parameters appear in tree).
  10. Delete the contents of the Part body & update the
  InertiaVolume.1 , the Volume values in the tree are not
  changing to zero - This is the problem.
  .
  RESULT:
  All the parameters (especially Volume in this case) in the
  Specification tree, Edit window & in f(x) for measured
  inertia properties are not same & do not represent
  updated/modified correct values of these parameters at any
  moment.
  EXPECTED RESULT:
  All the parameters (especially Volume in this case) in the
  Specification tree, Edit window & in f(x) for measured
  inertia properties should be same & represent
  updated/modified correct values of these parameters at any
  moment.
  

Problem conclusion

• THIS PROBLEM WAS REPORTED ON CATIA V5R19SP5.
  THIS PROBLEM WILL BE FIXED IN NEXT RELEASE WHICH IS CATIA
  V5R21GA & V5R20SP3.
  Additional Closure Information:
  Incident Diagnosis
  Measure Inertia: Content & Parameters in the tree, edit
  window & f(x) are different.
  Explanation
  This problem is closed as FIN on CATIA V5R19 level. So this
  problem is now fixed on CATIA V5R20SP3 & CATIA V5R21GA
  levels.
  The problem is corrected now and the content & parameters in
  the Specificatio tree, edit window and f(x) are same now.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels

• R519 PSN

     UP