HD95841: ASMD: JOGGLE IS NOT UPDATED AFTER CHANGING THE SUPPORT FOR SURFA CIC FLANGE.

APAR status

• Closed as program error.

Error description

• Scenario is data specific:
  1. Open CATPart in Aerospace Sheet Metal Design workbench.
  2. Double-click on Surfacic Flange.
  3. On the Support tab, change the Support Geometry from
  ?Original_Support? surface to ?New_Support? surface and click
  OK. Joggle does not update to correct depth.
  4. Double-click on Joggle.
  5. Click OK in Joggle Definition window.
  .
  Observation:
  Joggle updates to correct depth.
  .
  Expected Result:
  When Surfacic Flange definition is changed, part should
  update or indicate that it needs to be updated eventually
  updating the Joggle feature.
  

Local fix

• empty
  

Problem summary

• Scenario is data specific:
  1. Open CATPart in Aerospace Sheet Metal Design workbench.
  2. Double-click on Surfacic Flange.
  3. On the Support tab, change the Support Geometry from
  ?Original_Support? surface to ?New_Support? surface and click
  OK. Joggle does not update to correct depth.
  4. Double-click on Joggle.
  5. Click OK in Joggle Definition window.
  .
  Observation:
  Joggle updates to correct depth.
  .
  Expected Result:
  When Surfacic Flange definition is changed, part should
  update or indicate that it needs to be updated eventually
  updating the Joggle feature.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION V5R21 GA level.
  Additional Closure Information:
  Incident Diagnosis:
  Joggle is not updated after changing the support for Surfacic
  flange.
  .
  Correction Explanation:
  The Joggle is updated correctly after the correction.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R521 PSN

     UP