HD95281: DRAFTING/ CATIA abbends while creating offset section view

APAR status

• Closed as program error.

Error description

• SCENARIO:
  This is for a specific CATIA Drawing.
  1. Open the CATPart and the CATDrawing.
  2. Select offset section view command.
  3. Create a offset section view
  RESULTS:
  CATIA abends with a runtime exception ?Click OK to terminate?
  EXPECTED RESULTS:
  CATIA should not abbend.
  

Local fix

• empty
  

Problem summary

• SCENARIO:
  This is for a specific CATIA Drawing.
  1. Open the CATPart and the CATDrawing.
  2. Select offset section view command.
  3. Create a offset section view
  RESULTS:
  CATIA abends with a runtime exception ?Click OK to terminate?
  EXPECTED RESULTS:
  CATIA should not abbend.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION V5R21 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R19 SP8.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP3.
  Additional Closure Information:
  INCIDENT DIAGNOSIS:
  CATIA Abbends when creating a section view.
  .
  CORRECTION EXPLANATION:
  The behavior is corrected by code correction now CATIA does
  not terminate.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R519 PSN SP51908

     UP10/06/10 I 1000