HD90545: CATIA ABENDS WHILE EDITING REVOLUTE JOINT CREATION WINDOW.

APAR status

• Closed as program error.

Error description

• ABSTRACT:
  CATIA abends while editing Revolute Joint Creation window.
  .
  SCENARIO:
  1. Open the "PRODUCT1.CATProdcut". Work bench is "DMU Kinematics
  2. Click on the "Revolute Joint" icon. The "Joint Creation" wind
  appears.
  3. Click the "Part.1" face to select the cylinder axis of "Part.
  "Line 1".
  4. Click the "Part.2" face to select the cylinder axis of "Part.
  "Line 2".
  5. Click the top face of "Part.1" to select it as "Plane 1".
  6. Click the "Part.2" face to select it as "Plane 2".
  7. Click on the "Centered" to turn on.
  8. Click the top face of "Part.1" to select it as "Plane 3".
  9. Click the "Part.2" face to select it as "Plane 4".
  10. Click on the "Offset" button.
  11. Click on the "Centered".
  12. Repeat step10 and step11 ten times.
  .
  RESULT:
  CATIA abends.
  .
  EXPECTED RESULT:
  CATIA should not abend by this operation.
  

Local fix

Problem summary

• ABSTRACT:
  
  CATIA abends while editing Revolute Joint Creation window.
  .
  SCENARIO:
  1. Open the "PRODUCT1.CATProdcut". Work bench is "DMU
  Kinematics".
  2. Click on the "Revolute Joint" icon. The "Joint Creation"
  window appears.
  3. Click the "Part.1" face to select the cylinder axis of
  "Part.1" as "Line 1".
  4. Click the "Part.2" face to select the cylinder axis of
  "Part.2" as "Line 2".
  5. Click the top face of "Part.1" to select it as "Plane 1".
  6. Click the "Part.2" face to select it as "Plane 2".
  7. Click on the "Centered" to turn on.
  8. Click the top face of "Part.1" to select it as "Plane 3".
  9. Click the "Part.2" face to select it as "Plane 4".
  10. Click on the "Offset" button.
  11. Click on the "Centered".
  12. Repeat step10 and step11 ten times.
  .
  RESULT:
  CATIA abends.
  .
  
  EXPECTED RESULT:
  CATIA should not abend by this operation.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION V5R21 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP1 AND
  V5R19 SP7.
  Additional Closure Information:
  Incident Diagnosis
  CATIA abends while editing Revolute Joint Creation window.
  Correction Explanation
  The problem is corrected by removing the CATPathElement which
  was unnecessary.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R519 PSN SP51907

     UP10/02/24 I 1000