HD90473: GSD: WHEN ORIGIN IS NOT SELECTED FOR AXIS SYSTEM DEFINITION, AXI SYSTEM LOCATION IS NOT ASSOCIATIVE TO ORIGIN COMPUTED BY INTERSE

APAR status

• Closed as program error.

Error description

• .
  SCENARIO:
  1. Create a pad
  2. Create one datum plane for each mutually perpendicular face o
  pad with offset = 0
  3. Create an Axis System with: X axis = plane 1, Y Axis = plane
  Z axis = plane 3 respectively.
  .
  OBSERVATION1:
  Warning message is displayed saying: The selection may be ignore
  because the other axes are defined. If you want to free them, us
  Selection in the contextual menu.
  4. Click OK to the message prompt
  .
  OBSERVATION2:
  In the Axis System Definition Origin field is No Selection
  .
  5. Click OK to Axis system definition dialog box
  6. Double click on the Axis System just created on the spec tree
  .
  OBSERVATION3:
  The Origin is now 'Coordinates'
  .
  7. Through contextual menu in origin field select No Selection
  8. Click OK to Axis system definition dialog box
  6. Double click on the Axis System in the spec tree
  .
  PROBLEM:
  Axis System Origin is still Coordinates. Due to this defect, the
  System is not updating when the datum plane is being modified. U
  must go in and manually changed the Origin to 'No Selection' to
  the Axis System to update.
  .
  EXPECTED RESULT:
  Provide warnings at the end of the Axis System command to educat
  user that origin is not explicitly selected and hence Axis syste
  will not be associative to origin location
  

Local fix

Problem summary

• .
  SCENARIO:
  1. Create a pad
  2. Create one datum plane for each mutually perpendicular
  face of the pad with offset = 0
  3. Create an Axis System with: X axis = plane 1, Y Axis =
  plane 2 and Z axis = plane 3 respectively.
  .
  OBSERVATION1:
  Warning message is displayed saying: The selection may be
  ignored because the other axes are defined. If you want to
  free them, use No Selection in the contextual menu.
  4. Click OK to the message prompt
  .
  OBSERVATION2:
  In the Axis System Definition Origin field is No Selection
  .
  5. Click OK to Axis system definition dialog box
  6. Double click on the Axis System just created on the spec
  tree.
  .
  OBSERVATION3:
  The Origin is now 'Coordinates'
  .
  7. Through contextual menu in origin field select No Selection
  8. Click OK to Axis system definition dialog box
  6. Double click on the Axis System in the spec tree
  .
  PROBLEM:
  Axis System Origin is still Coordinates. Due to this defect,
  the Axis System is not updating when the datum plane is being
  modified. User must go in and manually changed the Origin to
  'No Selection' to get the Axis System to update.
  .
  EXPECTED RESULT:
  Provide warnings at the end of the Axis System command to
  educate the user that origin is not explicitly selected and
  hence Axis system will not be associative to origin location
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON Virtual Design  VERSION V5R21
  GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R19 SP7.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP1.
  Additional Closure Information:
  .
  Technical explanation of the defect:
  Warning message needed at the end of the Axis System command
  to inform the user that origin is not explicitly selected and
  hence Axis system will not be associative to origin location.
  .
  Technical explanation of the correction:
  Warning message is now displayed in case the origin or the
  axis is computed by current default calculation, educating
  the user  that the default computed element is not
  associative with other inputs.
  .
  Possible by-pass and/or correction limitation:
  None
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN SP51907

     UP10/02/24 I 1000