HD89805: MEASURE INERTIA VALUES OF IOXG, IOYG, IOZG, IXYG, IXZG AND IYZG ARE DIFFERENT IN .TXT FILE AND "MEASURE INERTIA PANEL

APAR status

• Closed as program error.

Error description

• SCENARIO:
  1. Start CATIA V5R19SP5. In Tools/Options set the
  units to "Inch" & Open "TEST.CATPart".
  2. Select "Measure
  Inertia" and select Part1. Observe the results in "Measure
  Inertia" panel.
  3. From the "Measure Inertia" panel, use the
  "Export" button and save the results locally.
  4. Open the
  results from the local disk.
  5. Compare the results from the
  .txt file to the results from the "Measure Inertia"
  panel.
  .
  RESULT :
  Values of IoxG, IoyG, IozG, IxyG, IxzG and
  IyzG are different in .txt file and "Measure Inertia"
  panel.
  .
  EXPECTED RESULT :
  All the values should be the same
  in the .txt file and in the "Measure Inertia" panel.
  

Local fix

Problem summary

• SCENARIO:
  1. Start CATIA V5R19SP5. In Tools/Options set the units to
  "Inch" & Open "TEST.CATPart".
  2. Select "Measure Inertia" and select Part1. Observe the
  results in "Measure Inertia" panel.
  3. From the "Measure Inertia" panel, use the "Export" button
  and save the results locally.
  4. Open the results from the local disk.
  5. Compare the results from the .txt file to the results from
  the "Measure Inertia" panel.
  .
  RESULT :
  Values of IoxG, IoyG, IozG, IxyG, IxzG and IyzG are different
  in .txt file and "Measure Inertia" panel.
  .
  EXPECTED RESULT :
  All the values should be the same in the .txt file and in the
  "Measure Inertia" panel.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION V5R20 SP1 level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R19 SP7.
  Additional Closure Information:
  Incident Diagnosis
  Measure Inertia Values of IoxG, IoyG, IozG, IxyG, IxzG and
  IyzG are different in .txt file and "Measure Inertia panel.
  Correction Explanation
  The units of the Inertia vales were not getting converted
  based on the units specified in tools/options, during EXPORT.
  Now the problem is fixed and is working fine.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN SP51907

     UP10/02/24 I 1000