HD88204: WHEN DELETING --B DOCUMENT FROM CATIA, THE --A CHANGES HOW IT I S ATTACHED TO THE PART REFERANCE

APAR status

• Closed as program error.

Error description

• Abstract: When deleting CatDrawing Document of a Rev B or
  above the previous revision of the reference changes the
  document from attached as primary Documentation to Attached
  as none Documentation.
  .
  Scenario
  1. Create part with CatDrawing role primary and Documentation
  link, a CatPart role primary and Reprsenation link,and a Word
  Document role secondary and a Documentation Link
  2. Approve all documents
  3. Approve reference
  4. Create a new version of the reference
  5. Create revision of the CatPart, CatDrawing and Word Document
  6. Save and send all three documents to Content manager
  7. In part editor refresh from the Database
  8. In Part editor cut the CatPart
  9. You will not have to cut the CatDrawing or the Word Drawing
  as they are not on the rev A.
  10. Save
  11. In Content manager, delete all three documents you just
  created.
  12. Go to Part Editor and refresh from the Database.
  .
  Results.  Select the --- and select Documents tab.  The
  CATDrawing and the Word Document revert to a role of NONE.
  The CATpart stays correct.
  .
  Expected results.  The CATDrawing and Word document should not
  change how they are attached to the released Part reference.
  .
  

Local fix

Problem summary

• Abstract: When deleting CatDrawing Document of a Rev B or
  above the previous revision of the reference changes the
  document from attached as primary Documentation to Attached as
  none Documentation.
  .
  Scenario
  1. Create part with CatDrawing
  role primary and Documentation link, a CatPart role primary
  and Reprsenation link,and a Word Document role secondary and a
  Documentation Link
  2. Approve all documents
  3. Approve
  reference
  4. Create a new version of the reference
  5. Create
  revision of the CatPart, CatDrawing and Word Document
  6. Save
  and send all three documents to Content manager
  7. In part
  editor refresh from the Database
  8. In Part editor cut the
  CatPart
  9. You will not have to cut the CatDrawing or the Word
  Drawing as they are not on the rev A.
  10. Save
  11. In Content
  manager, delete all three documents you just created.
  12. Go
  to Part Editor and refresh from the Database.
  .
  Results.
  Select the --- and select Documents tab.  The CATDrawing and
  the Word Document revert to a role of NONE.  The CATpart stays
  correct.
  .
  Expected results.  The CATDrawing and Word document
  should not change how they are attached to the released Part
  reference.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON   VERSION V5R20 GA level.
  NOTE
  THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R19 SP6.
  Additional
  Closure Information:
  The problem has been fixed.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  ENOVIA V5 VPM N

• Fixed component ID

  569151400

Applicable component levels

• R519 PSN SP51906

     UP09/10/27 I 1000