HD87664: GSD: FILL : ERROR MESSAGE IS NOT OK. .

APAR status

• Closed as program error.

Error description

• SCENARIO:
  1. Start CATIA V5
  2. Open the CATPart
  Workbench: Generative shape design
  3. Select Extrude command
  4. Select sketch.1 as profile
  5. Click OK.
  Observation: "Update error: Extrusion operator. A selected
  contour is self intersecting. This configuration cannot be
  used in Extrusion operator. Choose a wire that is not self
  intersecting."
  This error message is OK
  6. Click cancel in Extruded surface definition window.
  6. Select the Fill command
  Fill Surface Definition window will be displayed.
  3. Select Sketch.1 as Boundary.
  4. Click OK button.
  .
  PROBLEM:
  Error message is displayed because selected boundary is
  invalid for fill.
  Errror message says  Update error: Fill.1
  <CATTopObjectInternalError 131087>
  This message is not understandable.
  .
  

Local fix

Problem summary

• Error message is displayed because selected boundary is invalid
  for fill.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON   VERSION V5R20 GA level.
  Additional Closure Information:
  INCIDENT DIAGNOSIS: Error message is not OK while creating Fill
  Surface.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R518 PSN

     UP