HD86852: PART: VALUE OF PARAMETER PUT AS SQUARE ROOT IN FORMULA EDITOR C AUSES CATIA TO HANG.

APAR status

• Closed as unreproducible in next release.

Error description

• Value of parameter put as square root in formula
  editor causes CATIA to hang.
  .
  SETTINGS:
  Activate Tools / Options / Parameters and
  Measure / Knowledge tab / Relations update in part
  context
  Creation of synchronous relations
  Creation of relations evaluated during the global
  update
  .
  SCENARIO:
  1) Start CATIA.
  2) Open provided CATPart.
  3) Double click on Conic feature in specification
  tree to open Conic Definition.
  4) Insert value for Parameter as sqrt(2)-0.1. Notice
  that no warning message appears that the value is
  out of range.
  5) The parameter does not change the value. Old
  value is retained.
  6) Right click on Parameter under Conic feature
  and select Edit formula.
  7) Insert value as sqrt(2)-0.1.
  .
  OBSERVATION:
  Warning message is displayed and CATIA session
  hangs. Warning message cannot be closed.
  .
  EXPECTED RESULT:
  CATIA session should not hang. A warning
  message should be shown after step 4. Also after
  step 7 CATIA should not hang.
  .
  

Local fix

Problem summary

• Value of parameter put as square root in formula
  editor causes CATIA to hang.
  .
  SETTINGS:
  Activate Tools / Options / Parameters and
  Measure / Knowledge tab / Relations update in part
  context
  Creation of synchronous relations
  Creation of relations evaluated during the global
  update
  .
  SCENARIO:
  1) Start CATIA.
  2) Open provided CATPart.
  3) Double click on Conic feature in specification
  tree to open Conic Definition.
  4) Insert value for Parameter as sqrt(2)-0.1. Notice
  that no warning message appears that the value is
  out of range.
  5) The parameter does not change the value. Old
  value is retained.
  6) Right click on Parameter under Conic feature
  and select Edit formula.
  7) Insert value as sqrt(2)-0.1.
  .
  OBSERVATION:
  Warning message is displayed and CATIA session
  hangs. Warning message cannot be closed.
  .
  EXPECTED RESULT:
  CATIA session should not hang. A warning
  message should be shown after step 4. Also after
  step 7 CATIA should not hang.
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  VERSION V5R19.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  VERSION V5R20 GA level
  VERSION V5R19 SP7.
  Additional Closure Information:
  Incident Diagnosis:
  Value of parameter put as square root in formula editor causes C
  to hang.
  .
  Correction Explanation:
  The correction has been provided and the incorrect value is not
  accepted.
  Also an error message is displayed after inputting the value for
  formula as well as parameter.
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 AIX

• Fixed component ID

  569101000

Applicable component levels

• R519 PSN

     UP