HD86788: PS: CATIA CRASH WHEN OPENING IN NEW WINDOW AFTER MODIFYING A PA RT

APAR status

• Closed as program error.

Error description

• SCENARIO:
  1. Start CATIA V5 with the provided CAT settings.
  2. Right-click on Product1 / Components / New Part
  3. Open the Part in a New Window (right-click on
  Part1 / Part1.1 object /Open in New Window)
  4. Change WB: Start / Mechanical Design / Part
  Design
  5. Select xy plane / Sketch / Rectangle
  6. Exit Sketcher
  7. Pad / OK
  8. Exit Window (of Part1) / Close Message
  Appears / Click No
  (Don?t save changes)
  9. Re-Open the Part in a New Window (right-click
  on Part1 / Part1.1 object / Open in New Window)
  10. Double-Click on the Part1 in the new Window...
  .
  OBSERVATION:
  CATIA crashes with Runtime exception "Click OK to
  terminate" or directly without any message.
  .
  

Local fix

Problem summary

• SCENARIO:
  1. Start CATIA V5 with the provided CAT settings.
  2. Right-click on Product1 / Components / New Part
  3. Open the Part in a New Window (right-click on
  Part1 / Part1.1 object /Open in New Window)
  4. Change WB: Start / Mechanical Design / Part
  Design
  5. Select xy plane / Sketch / Rectangle
  6. Exit Sketcher
  7. Pad / OK
  8. Exit Window (of Part1) / Close Message
  Appears / Click No
  (Don?t save changes)
  9. Re-Open the Part in a New Window (right-click
  on Part1 / Part1.1 object / Open in New Window)
  10. Double-Click on the Part1 in the new Window...
  .
  OBSERVATION:
  CATIA crashes with Runtime exception "Click OK to
  terminate" or directly without any message.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON   VERSION V5R20 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R19 SP6.
  Additional Closure Information:
  Incident Diagnosis:
  CATIA crash after modifying a CATPart used in two open
  Products.
  .
  Correction Explanation:
  The pointed document history was not cleared.
  Now the history is not taken into consideration.
  There is no crash of CATIA.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 AIX

• Fixed component ID

  569101000

Applicable component levels

• R519 PSN SP51906

     UP09/10/27 I 1000