HD85888: XCADUDL : INSERT EXISTING UGNX5 PART INTO CATIA ASSEMBLY EITHER GETS DIRECT SERVER ERROR OR FAILS TO CREATE GEOMETRY ON 64B OS

APAR status

• Closed as program error.

Error description

• XCADUDL : Insert Existing UGNX5 Part into CATIA
  assembly either gets Direct Server error or fails to
  create geometry on 64b OS.
  .
  SCENARIO:
  1). Launch CATIA and set settings for UDL
  conversion.
  2). Start with a new assembly in assembly design.
  3). Insert Existing Component and insert
  camcap.prt
  - Fails with Direct Server error or no visible
  geometry.
  .
  

Local fix

Problem summary

• XCADUDL : Insert Existing UGNX5 Part into CATIA
  assembly
  either gets Direct Server error or fails to
  create geometry
  on 64b OS.
  .
  SCENARIO:
  1). Launch CATIA and set settings for
  UDL
  conversion.
  2). Start with a new assembly in assembly
  design.
  3). Insert Existing Component and insert
  camcap.prt
  - Fails with Direct Server error or no visible
  geometry.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON   VERSION V5R20 GA level.
  NOTE
  THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R19 SP6.
  Additional
  Closure Information:
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN

     UP