HD85769: GSD: SWEEP: WARNINGS ARE THROWN AND TWIST IS GENERATED IN VOLUM E SWEEP PROFILE.

APAR status

• Closed as program error.

Error description

• GSD: SWEEP: Warnings are thrown and twist is
  generated in Volume sweep profile.
  .
  SCENARIO:
  1. Start CATIA
  2. Open the CATPart
  Workbench: Generative Shape Design
  3. Check the Corner.1
  3.1 Double click Corner.1 in the tree.
  Observation: The corner is created by Helix.1 and
  Helix.2 curves
  3.2 Click Cancel button to close Corner Definition
  window dialog box.
  4.1 Click Volume Sweep
  The Sweep Volume Definition window is opened.
  4-2 Click Circle.1 in the tree.
  The Circle.1 is defined as a Profile box
  4.2 Click Corner.1 in the tree.
  The Corner.1 is defined as a Guide Curve box.
  4.3 Click OK
  Observation:
  Warning messages appear and twist is generated in
  Volume sweep profile.
  Warning messages are
  Topological operator: Internal gap detected in
  resulting topology. Modify the parameter value(s)
  or tolerant modeling parameter value(s) (if any) or
  change the operand(s).
  Sweep or Loft or Blend operator: Face has a small
  edge. It may lead to an error in following
  operations. - Clean input data - Check coupling
  data (loft, blend)
  Sweep or Loft or Blend operator: Gap detected
  between resulting surfaces. Modify the parameter
  value(s) or tolerant modeling parameter value(s)
  (if any) or change the operand(s).
  .
  PROBLEM:
  Warnings are thrown and twist is generated while
  creating Volume sweep.
  .
  

Local fix

Problem summary

• GSD: SWEEP: Warnings are thrown and twist is generated in Volume
  sweep profile
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  INCIDENT DIAGNOSIS: Warnings are thrown and
  twist is generated in Volume sweep profile.
  CORRECTION EXPLANATION: The code has been
  modified so that Twist will not generate in the
  volume sweep profile.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R518 PSN

     UP