HD85593: ELECTRICAL (EHI) / RECOMPUTE ALL SETS BUILD MODE OF BUNDLE SEGM ENTS TO SLACK

APAR status

• Closed as program error.

Error description

• Electrical (EHI) / Recompute All sets Build Mode of
  Bundle Segments to Slack
  .
  Scenario:
  1. Open CATIA V5 and switch to Workbench
  Electrical Harness Assembly
  2. Apply Geometrical Bundle on the product
  3. For the routing insert either two connectors (or
  supports) or a new part with two points.
  3. Run Bundle Segment (not Multi-branchable),
  routing it through the connectors (or supports) or
  from point to point.
  4. Change Build Mode to Length or Bend and click
  OK
  5. Double click on the Geometrical Bundle for
  activating it
  6. Use Tools / Recompute All Bundle Segments
  7. Update all
  8. Edit the Bundle Segment
  .
  Problem: Build Mode is Slack
  .
  Expected behaviour: the Build Mode should be
  Length (or Bend)
  .
  

Local fix

Problem summary

• Electrical (EHI) / Recompute All sets Build Mode of Bundle Segm
  ents to Slack
  Electrical (EHI) / Recompute All sets Build Mode of
  Bundle Segments to Slack
  .
  Scenario:
  1. Open CATIA V5 and switch to Workbench
  Electrical Harness Assembly
  2. Apply Geometrical Bundle on the product
  3. For the routing insert either two connectors (or
  supports) or a new part with two points.
  3. Run Bundle Segment (not Multi-branchable),
  routing it through the connectors (or supports) or
  from point to point.
  4. Change Build Mode to Length or Bend and click
  OK
  5. Double click on the Geometrical Bundle for
  activating it
  6. Use Tools / Recompute All Bundle Segments
  7. Update all
  8. Edit the Bundle Segment
  .
  Problem: Build Mode is Slack
  .
  Expected behaviour: the Build Mode should be
  Length (or Bend)
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R19SP05
  .
  Incident Diagnosis
  RecomputeAllBundleSegment command sets Build
  Mode of Bundle Segments of old type to Slack
  mode.
  .
  Correction Explanation
  Code changes done to fix the problem.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN SP51905

     UP09/07/31 I 1000