HD85549: ASD : AFTER CHANGING OPTION DISPLAY ASSOCIATED PART IN BOM IS

APAR status

• Closed as program error.

Error description

• ASD : After changing option Display associated
  part in BOM is changed to default automatically
  .
  SCENARIO:
  1. Create a CATProduct and insert a new CATPart
  (A) in this CATProduct.
  2. Use the function associativity in the assembly
  work bench (Menu / Insert/ Associativity) The
  Panel Assembly Part Association will be open.
  3.When using the function the option Display
  associated part in BOM is activated as default.
  4.Turn this option off and click OK.
  5. Again launch Associativity, the option Display
  associated part in BOM is still deactivated. Correct
  behavior.
  6. Now once again Associativity, the option Display
  associated part in BOM is activated automatically.
  This is problem.
  .
  Expected result:
  Once changed the Display associated part in BOM
  option should not change to default.
  .
  .
  

Local fix

Problem summary

• ASD : After changing option Display associated part in BOM is
  changed to default automatically
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R19SP05
  Incident Diagnosis
  Check Uncheck status of BOM setting from
  associativity panel was not stored.
  .
  Correction Explanation
  Algorithm corrected to get expected behavior.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN SP51905

     UP09/07/31 I 1000