HD84283: THE VALUE OF THE DENSITY OF MEASURE INERTIA IS SHOWN "-1" WHEN

APAR status

• Closed as documentation error.

Error description

• ABSTRACT:
  The value of the Density of Measure Inertia is
  shown "-1kg/m3" when it should be Not uniform.
  SCENARIO:
  1)Start CATIAV5R18SP6
  2)Openthe "CIS_DENSITY_TEST_R18.CATProduct".
  3Checkthe "Application /Measure /InertiaVolume27/
  Density"
  RESULT:
  The Density is shown as "-1kg/m3" instead of "Not
  Uniform".
  Expected Result:
  The density should be shown as "Not uniform"
  instead of "-1kg/m3".
  .
  

Local fix

Problem summary

• The value of the Density of Measure Inertia is shown "-1" when
  it is Not uniform
  ABSTRACT:
  The value of the Density of Measure Inertia is
  shown "-1kg/m3" when it should be Not uniform.
  SCENARIO:
  1)Start CATIAV5R18SP6
  2)Openthe "CIS_DENSITY_TEST_R18.CATProduct".
  3Checkthe "Application /Measure /InertiaVolume27/
  Density"
  RESULT:
  The Density is shown as "-1kg/m3" instead of "Not
  Uniform".
  Expected Result:
  The density should be shown as "Not uniform"
  instead of "-1kg/m3".
  .
  

Problem conclusion

• THIS MODIFICATION WILL BE INCLUDED IN THE
  DOCUMENTATION DELIVERED WITH CATIA
  VERSION 5 RELEASE 20 LEVEL.
  Please find below the path to the updated
  documentation in which it is clearly mentioned that
  when Density is shown as "Not Uniform" in the
  dialogue box, the density parameter will have the
  value "-1" in the specification tree.
  The documentation was updated on R20 level, at
  the location mentioned below.
  Documentation Reference:
  >DMUNAV
  >Measuring Inertia
  >Measuring 3D Inertia
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels