HD83403: DRAFTING (GENDRAFT) "COORDINATE DIMENSIONS" CANNOT BE CREATED R EPEATEDLY WITH 3D VALUE

APAR status

• Closed as suggestion for future release.

Error description

• Drafting (GenDraft) "Coordinate Dimensions"
  cannot be created repeatedly with 3D value
  .
  SCENARIO:
  .
  1. Open CATIA V5 with cache mode.
  2. Open the CATProduct.
  3. Open CATDrawing.
  4. Click "Coordinate Dimensions" icon.
  5. Activate "3D Coordinates" on the tools bar.
  6. Select the pink point on the sheet.
  >>"Coordinate Dimensions" is created with the
  3D value.
  7. Go to "Product1.CATProduct" and confirm
  that "Part1(Part1.1)" which have point of 3D is
  changed to "Design Mode".
  8. Bring "Part1(Part1.1)" on "Visualization Mode" by
  contextual menu.
  9. Click "Coordinate Dimensions" icon in drawing
  W/B.
  10. Activate "3D Coordinates" on the tools bar.
  11. Select the pink point on the sheet.
  .
  RESULT OBTAINED:
  .
  "Coordinate Dimensions" is created with "SubText"
  instead of 3D values.
  .
  .
  

Local fix

Problem summary

Problem conclusion

Temporary fix

Comments

• THIS APAR IS CONSIDERED AS A SUGGESTION
  FOR IMPROVEMENT FOR CATIA.
  PLEASE CONTACT YOUR SUPPORT DEPARTMENT IN
  ORDER TO OPEN A REQUIREMENT FORM.
  INCIDENT DIAGNOSIS:
  .
  Coordinate dimension not properly created once
  part has been unloaded.
  .
  DEVELOPMENT REQUEST JUSTIFICATION:
  .
  Currently the loading of 3d parts are properly
  taking place but the problem is associated with
  the "unloading" of parts. This would require a high-
  impacting development, which can not be done
  immediately and could be possible through an
  enhancement. So please open an ERD.
  .
  ANSWER AND BY-PASS:
  .
  Do not unload the part manually.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels