HD82850: REPORTER (STRBOM) RETURNS INCORRECT LENGTH ON ST_FRAME PROFILE WITH ENDCUT

APAR status

• Closed as program error.

Error description

• Reporter (STRBOM) returns incorrect length on
  ST_Frame profile with endcut
  Scenario: -
  1. Create ST_Frame/Place/unspec/Beam 2X2X.25
  length 20.002"
  2. This beam should intersect another Beam
  2X2X.25
  at a 90 degree angle
  3. Run STRMTL(STRBOM) reporter on Beam
  created in
  step 1. Reporter should return value Member
  length=20.002
  4. Cope Beam 1 into Beam 2 using
  ST_frame/Perform/Cutback/Manual/Notching
  5. Run STRMTL(STRBOM) reporter on Beam
  created in
  step 1. Reporter should return value Member
  length=20.002
  6. Create splitting plane to represent snipe angle 7.
  Create snipe using ST_Frame/Perform/Split
  8. Run STRMTL(STRBOM) reporter on Beam
  created in
  step1
  RESULT : Reporter now returns value Member
  length 19.502
  EXPECTED RESULT: Reporter should return the
  value as 20.002
  .
  

Local fix

Problem summary

• Reporter (STRBOM) returns incorrect length on ST_Frame profile
  with endcut
  Reporter (STRBOM) returns incorrect length on
  ST_Frame profile with endcut
  Scenario: -
  1. Create ST_Frame/Place/unspec/Beam 2X2X.25
  length 20.002"
  2. This beam should intersect another Beam
  2X2X.25
  at a 90 degree angle
  3. Run STRMTL(STRBOM) reporter on Beam
  created in
  step 1. Reporter should return value Member
  length=20.002
  4. Cope Beam 1 into Beam 2 using
  ST_frame/Perform/Cutback/Manual/Notching
  5. Run STRMTL(STRBOM) reporter on Beam
  created in
  step 1. Reporter should return value Member
  length=20.002
  6. Create splitting plane to represent snipe angle 7.
  Create snipe using ST_Frame/Perform/Split
  8. Run STRMTL(STRBOM) reporter on Beam
  created in
  step1
  RESULT : Reporter now returns value Member
  length 19.502
  EXPECTED RESULT: Reporter should return the
  value as 20.002
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA V425SP15
  Incident Diagnosis
  Reporter (STRBOM) returns incorrect length on
  ST_Frame profile with endcut
  Correction Explanation
  The STRBOM reporter for STF profile with endcut
  was not taking account correctly of the endcut.
  Problem is fixed now
  Answer and By-Pass
  None
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V4 AIX

• Fixed component ID

  562610000

Applicable component levels

• R425 PSN UH95315

     UP09/07/07 I 1000