HD82618: PS: PROBLEM IN CATIA NUMBERING

APAR status

• Closed as program error.

Error description

• PS: Problem in Catia numbering.
  .
  1. Create a CATIA Product, with 2 CATIA Part
  Product1
  Part1
  Part2
  2. Create a second CATIA Product, with 2 new Part
  and add also Part1 and Part2 (By Copy and paste
  operation as shown in ppt)
  Product2
  Part3
  Part4
  Part1
  Part2
  3. Generate Numbering on both Assembly by the
  command 'Generate Numbering'
  4. Part1 and Part2 have different numbers in the
  two assembly.
  5. Keep both the assembly open at the same time.
  6. Call the menu analyze Bill of Material
  7. Add Number as to visualized attribute.
  8. On Product1 the results are the follwing:
  - for Bill of Material and for Recapitulation list,
  the Numbers are      wrong.
  - for Listing Report (and in property panel) the
  Numbers are right
  9. For Product2 the results are correct for both Bill
  Of Material and Listing Report.
  10. If you close Product2, the results are correct
  for both Bill Of Material and for Listing Report.
  Expected Result: For product1 the listing report and
  Recapitulation List should have the same numbers,
  when Product2 is loaded in the session.
  .
  

Local fix

Problem summary

• PS: Problem in Catia numbering
  PS: Problem in Catia numbering.
  .
  1. Create a CATIA Product, with 2 CATIA Part
  Product1
  Part1
  Part2
  2. Create a second CATIA Product, with 2 new Part
  and add also Part1 and Part2 (By Copy and paste
  operation as shown in ppt)
  Product2
  Part3
  Part4
  Part1
  Part2
  3. Generate Numbering on both Assembly by the
  command 'Generate Numbering'
  4. Part1 and Part2 have different numbers in the
  two assembly.
  5. Keep both the assembly open at the same time.
  6. Call the menu analyze Bill of Material
  7. Add Number as to visualized attribute.
  8. On Product1 the results are the follwing:
  - for Bill of Material and for Recapitulation list,
  the Numbers are      wrong.
  - for Listing Report (and in property panel) the
  Numbers are right
  9. For Product2 the results are correct for both Bill
  Of Material and Listing Report.
  10. If you close Product2, the results are correct
  for both Bill Of Material and for Listing Report.
  Expected Result: For product1 the listing report and
  Recapitulation List should have the same numbers,
  when Product2 is loaded in the session.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  Incident Diagnosis
  Problem in Catia numbering
  Correction Explanation
  The correction is made to show the proper
  numbering in Bill of material (BOM)
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN

     UP