HD80926: SKETCHER: PROJECT 3D-ELEMENTS DOES NOT WORK IN AN EXISTING SKETCH.

APAR status

• Closed as program error.

Error description

• SKETCHER:Project 3D-Elements does not work in
  an existing sketch
  .
  SCENARIO:
  We want to project the geometry of this Part2 in
  this sketch.
  .
  1) OPEN Product1.CATProduct
  2) Open Part1
  3) Open skectch.1 of pad.2
  4) Double click on sketch
  Remove all curve type geometry from this sketch.
  5) Project 3D-Elements
  6) Select Part2
  7)Only this face is created, but no curve type
  geometry
  .
  PROBLEM:
  On performing the scenario only the face is
  created, but no curve type geometry.
  .
  

Local fix

Problem summary

• SKETCHER:Project 3D-Elements does not work in an existing sketc
  h
  SKETCHER:Project 3D-Elements does not work in
  an existing sketch
  .
  SCENARIO:
  We want to project the geometry of this Part2 in
  this sketch
  see picture
  .
  1) OPEN Product1.CATProduct
  2) Open Part1
  3) Open skectch.1 of pad.2
  4) Double click on sketch
  Remove all curve type geometry from this sketch.
  5) Project 3D-Elements
  6) Select Part2
  7)Only this face is created, but no curve type
  geometry
  .
  PROBLEM:
  On performing the scenario only the face is
  created, but no curve type geometry.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA AND ON V5R19SP04 LEVEL.
  Incident Diagnosis:
  Project 3D-Elements does not work in an existing
  sketch.
  Correction Explanation:
  While projecting the elements the correction in
  algorithm has been made to correctly project the
  element.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 AIX 64

• Fixed component ID

  569161000

Applicable component levels

• R519 PSN SP51904

     UP09/05/06 I 1000