HD80770: GSD: MULTI-SELECT REMOVE DOES NOT REMOVE THE PLANES FROM

APAR status

• Closed as program error.

Error description

• SCENARIO:
  1) Start CATIA.
  2) Open CATPart provided in the Generative Shape
  Design workbench.
  3) Holding the Ctrl key down, select all the planes
  in Geometric Set.1 in chronological order (1, 2, 3,
  4, 5, 6).
  4) Select Intersection icon.
  5) In Intersection definition panel, First element
  should have 6 elements.
  6) Select multi-selection icon for First element,
  select Plane.2,hold Shift key down, then select
  Plane.6. All planes should highlight except Plane.1.
  7) Select Remove. Verify that all planes except
  Plane.1 are removed.
  8) Close the First Elements window - only Plane.1 is
  in the input window.
  9) Select inside Second element input area, select
  line, Click OK to create intersection.
  .
  OBSERVATION:
  A multi-output is displayed in the specification tree
  and multiple points exist in 3D. The only point that
  was removed was the first point selected (of
  plane2).
  .
  

Local fix

Problem summary

• GSD: Multi-Select Remove does not remove the planes from
  the list in Intersect Dialog Box.
  SCENARIO:
  1) Start CATIA.
  2) Open CATPart provided in the Generative Shape
  Design workbench.
  3) Holding the Ctrl key down, select all the planes
  in Geometric Set.1 in chronological order (1, 2, 3,
  4, 5, 6).
  4) Select Intersection icon.
  5) In Intersection definition panel, First element
  should have 6 elements.
  6) Select multi-selection icon for First element,
  select Plane.2,hold Shift key down, then select
  Plane.6. All planes should highlight except Plane.1.
  7) Select Remove. Verify that all planes except
  Plane.1 are removed.
  8) Close the First Elements window - only Plane.1 is
  in the input window.
  9) Select inside Second element input area, select
  line, Click OK to create intersection.
  .
  OBSERVATION:
  A multi-output is displayed in the specification tree
  and multiple points exist in 3D. The only point that
  was removed was the first point selected (of
  plane2).
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R19SP04.
  .
  INCIDENT DIAGNOSIS:
  In Generative Shape Design workbench, Multi-
  Select Remove does not remove the planes from
  the list in Intersection Dialog Box. Intersection of
  all the selected planes (including the removed
  ones) was created in Output.
  .
  CORRECTION EXPLANATION:
  Due to changes made in algorithm, now CATPart is
  updated accordingly, by removing selected
  features.
  .
  ANSWER AND BYPASS:
  None.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN SP51904

     UP09/05/06 I 1000