IBM Support

HD80752: MACHINING (NCINFRA) / A TRANSITION PATH INCLUDING A MACHINE ROT ATION IS NOT CREATED FOR CERTAIN CASES.

Subscribe

You can track all active APARs for this component.

 

APAR status

  • Closed as program error.

Error description

  • Machining (NCInfra) / A Transition Path including a
Machine Rotation is not created for certain cases.
.
SCENARIO:
01 - Launch CATIA v5r19sp2
02 - File + Open the provided 'SR00012212-
Product.CATProduct'
03==>The first Part is the Part provided by the
Request Submitter
04==>The second Part is a Part that has been
rebuilt at FE Level, with the same Geometry.
05 - Start + Machining + Advanced Machining
06 - Create a second Manufacturing Program, one
dedicated for each Part
07 - Hide the Recreated Part
08 - keep the Submitter Part shown, and work in
the corresponding Manufacturing Program
09 - Insert + Prismatic Machining Operations +
Profile Contouring
10 - Define and Compute the Toolpath on the Top
Surface, as shown in the Video
11 - Insert + Prismatic Machining Operations +
Profile Contouring
12 - Define and Compute the Toolpath on the
Inclined Surface, as shown in the Video
13 - Hide the Submitter Part
14 - Show the Recreated Part, and work in the
corresponding Manufacturing Program
15 - Insert + Prismatic Machining Operations +
Profile Contouring
16 - Define and Compute the Toolpath on the Top
Surface, as shown in the Video
17 - Insert + Prismatic Machining Operations +
Profile Contouring
18 - Define and Compute the Toolpath on the
Inclined Surface, as shown in the Video
19 - Select the Part Operation + RMB + Object
Menu + Definition
20 - Click on the 'Machine' Button
21 - Click on the 'Folder' Button, to associate a
Machine
22  Browse to '...\v5r19sp2
\intel_a\startup\Manufacturing\Samples\NCMachine
Toollib\DEVICES' and select the
Mill_5axis.CATProduct' + OK + OK
23 - Workpiece Automatic Mount
The Defect Scenario is described by the
'SR00012212-FEReplayedScenario-Scenario.avi'
Video and by the following  steps:'SR00012212-
FEReplayedScenario-Scenario.avi' Video and by the
following steps:
24 - Generate Transition Path + Select the
Manufacturing Program associated to Recreated
Part
25==>A Transition Path is generated between the
two Profile Contouring Operations, corresponding
to the necessary Table Rotation.
26 - Generate Transition Path + Select the
Manufacturing Program associated to Submitter Part
27==>NO Transition Path is generated between the
two Profile Contouring Operations, and therefore
the Machine Rotation Instruction is missing.
REMARK: Step 27 is the reported Defect Behavior.
REMARK: Submitter Customer works on non CATIA
V5 Data coming from third Party Software.
REMARK: This Case is a short example of a
Problem occurring on real / industrial Cases.
.
EXPECTED RESULT:
Get a Transition Path, including a Machine Rotation
at Step 27.
.
.

Local fix

  • 



Problem summary


    

  • Machining (NCInfra) / A Transition Path including a Machine Rot
ation is not created for certain cases.
Machining (NCInfra) / A Transition Path including a
Machine Rotation is not created for certain cases.
.
SCENARIO:
01 - Launch CATIA v5r19sp2
02 - File + Open the provided 'SR00012212-
Product.CATProduct'
03==>The first Part is the Part provided by the
Request Submitter
04==>The second Part is a Part that has been
rebuilt at FE Level, with the same Geometry.
05 - Start + Machining + Advanced Machining
06 - Create a second Manufacturing Program, one
dedicated for each Part
07 - Hide the Recreated Part
08 - keep the Submitter Part shown, and work in
the corresponding Manufacturing Program
09 - Insert + Prismatic Machining Operations +
Profile Contouring
10 - Define and Compute the Toolpath on the Top
Surface, as shown in the Video
11 - Insert + Prismatic Machining Operations +
Profile Contouring
12 - Define and Compute the Toolpath on the
Inclined Surface, as shown in the Video
13 - Hide the Submitter Part
14 - Show the Recreated Part, and work in the
corresponding Manufacturing Program
15 - Insert + Prismatic Machining Operations +
Profile Contouring
16 - Define and Compute the Toolpath on the Top
Surface, as shown in the Video
17 - Insert + Prismatic Machining Operations +
Profile Contouring
18 - Define and Compute the Toolpath on the
Inclined Surface, as shown in the Video
19 - Select the Part Operation + RMB + Object
Menu + Definition
20 - Click on the 'Machine' Button
21 - Click on the 'Folder' Button, to associate a
Machine
22  Browse to '...\v5r19sp2
\intel_a\startup\Manufacturing\Samples\NCMachine
Toollib\DEVICES' and select the
Mill_5axis.CATProduct' + OK + OK
23 - Workpiece Automatic Mount
The Defect Scenario is described by the
'SR00012212-FEReplayedScenario-Scenario.avi'
Video and by the following  steps:'SR00012212-
FEReplayedScenario-Scenario.avi' Video and by the
following steps:
24 - Generate Transition Path + Select the
Manufacturing Program associated to Recreated
Part
25==>A Transition Path is generated between the
two Profile Contouring Operations, corresponding
to the necessary Table Rotation.
26 - Generate Transition Path + Select the
Manufacturing Program associated to Submitter Part
27==>NO Transition Path is generated between the
two Profile Contouring Operations, and therefore
the Machine Rotation Instruction is missing.
REMARK: Step 27 is the reported Defect Behavior.
REMARK: Submitter Customer works on non CATIA
V5 Data coming from third Party Software.
REMARK: This Case is a short example of a
Problem occurring on real / industrial Cases.
.
EXPECTED RESULT:
Get a Transition Path, including a Machine Rotation
at Step 27.
.
.

    



Problem conclusion


    

  • THIS PROBLEM WILL BE FIXED ON CATIA VERSION
5 RELEASE 20 GA LEVEL.
.
Incident Diagnosis
Machining (NCInfra) / A Transition Path including a
Machine Rotation is not created for certain cases.
Correction Explanation
A tolerance value too small to compare both . now
the problem is solved.
Answer and By-Pass
None identified
Additional Information: NOTE THAT THIS PROBLEM
WILL ALSO BE FIXED ON V5 R19 SP4
.

    



Temporary fix


    

  • 



Comments


    

  • 



APAR Information




    

  • APAR number
    HD80752
    • 

  • Reported component name
    CATIA V5 NT>XP
    • 

  • Reported component ID
    569151000
    • 

  • Reported release
    519
    • 

  • Status
    CLOSED  PER
    • 

  • PE
    NoPE
    • 

  • HIPER
    NoHIPER
    • 

  • Special Attention
    NoSpecatt
    • 

  • Submitted date
    2008-12-19
    • 

  • Closed date
    2009-01-20
    • 

  • Last modified date
    2009-05-06
    • 





    

  • APAR is sysrouted FROM one or more of the following:
    

    • 

  • APAR is sysrouted TO one or more of the following:
    

    • 



Fix information


    

  • Fixed component name
    CATIA V5 NT>XP
    • 

  • Fixed component ID
    569151000
    • 



Applicable component levels


    

  • R519  PSN  SP51904
       UP09/05/06  I  1000
    • 








      
              
                            

              

              [{"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Product":{"code":"SSVJ2K","label":"CATIA"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"519","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}}]
              

                                                                    

          
 
        

      

    

      

        

          

            
Document Information


            

            


                        

            Modified date:
            

            06 May 2009
            

            
                      

        


        

        


      

    

  



    

  

  
    
            

          
Page Feedback