HD79877: THE XY PLANE IS DELETED WHEN PERFORMING THE "INTERSECT 3D ELEMENTS"

APAR status

• Closed as program error.

Error description

• The xy plane is deleted when performing
  the "Intersect 3D Elements"
  SCENARIO :
  1. Create a new Product : File/New/Product
  2. Insert two CATParts inside the Product: Insert/
  New Part *2 (Part.1 and Part.2)
  3. Live the Two CATparts in show
  4. Activate Part.1
  5. Insert a Sketch: Sketch on YZ plane selected in
  the tree
  6. Intersect 3D element and make a window
  selection over the planes (Insert / Operation /3D
  geometry/ Intersect 3D element), see PPT for
  detailed scenario
  7. Go out o the sketch
  Problem, plane on which the sketch was design
  (YZ) is deleted from the CATPart.1
  This problem occurs only when the Part.2 is in
  show.
  .
  

Local fix

Problem summary

• The xy plane is deleted when performing the "Intersect 3D
  Elements"
  The xy plane is deleted when performing
  the "Intersect 3D Elements"
  SCENARIO :
  1. Create a new Product : File/New/Product
  2. Insert two CATParts inside the Product: Insert/
  New Part *2 (Part.1 and Part.2)
  3. Live the Two CATparts in show
  4. Activate Part.1
  5. Insert a Sketch: Sketch on YZ plane selected in
  the tree
  6. Intersect 3D element and make a window
  selection over the planes (Insert / Operation /3D
  geometry/ Intersect 3D element), see PPT for
  detailed scenario
  7. Go out o the sketch
  Problem, plane on which the sketch was design
  (YZ) is deleted from the CATPart.1
  This problem occurs only when the Part.2 is in
  show.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 19 SP03 LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R18SP08
  Incident Diagnosis
  The xy plane is deleted when performing
  the 'Intersect 3D Elements'.
  Correction Explanation
  The Management of imported datums has been
  fixed. The intersect 3D elements is now working
  correctly. The XY plane is not deleted anymore.
  Answer and By-Pass
  None
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R518 PSN SP51808

     UP09/02/24 I 1000