HD79866: WALL THICKNESS ANALYSIS CANNOT BE PERFORMED

APAR status

• Closed as program error.

Error description

• SCENARIO:
  1. Start CATIA R19 SP1
  2. Open the file CATPart.
  3. Start the Wall Thickness Analysis with the default
  settings. (Part Body)
  .
  OBSERVATION:
  ERROR: Internal error: operation cannot be
  performed
  .
  

Local fix

Problem summary

• Wall Thickness Analysis cannot be performed
  SCENARIO:
  1. Start CATIA R19 SP1
  2. Open the file CATPart.
  3. Start the Wall Thickness Analysis with the default
  settings. (Part Body)
  .
  OBSERVATION:
  ERROR: Internal error: operation cannot be
  performed
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA V5R20
  GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R19SP03
  .
  Incident Diagnosis
  Wall Thickness Analysis cannot be performed
  .
  Correction Explanation:
  Due to invalid data an empty face was generated
  causing problem for the waal thickness command
  to calculate the thickness.
  Correction is done on the data and the wall
  thickness command Runs correctly without any
  error.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R519 PSN SP51903

     UP09/01/22 I 1000