HD79382: ANALYSIS (FEM) / CATIA ABENDS WHEN CHANGE GRAPHIC PROPERTIES.

APAR status

• Closed as program error.

Error description

• ANALYSIS (FEM) / CATIA ABENDS WHEN CHANGE
  GRAPHIC PROPERTIES.
  .
  Scenario.
  .
  1) Open the CATAnalysis file
  2) Under the link.1 double click on every part
  3) Recompute the mesh Advanced Surface Mesh.1
  (double click and
  validate the global parameters)
  You get a warning: do you want to keep the
  simplified geometry and mesh
  select YES
  4) Recompute the mesh Advanced Surface Mesh.2
  (double click) warning: do you want to keep the
  simplified geometry and mesh select YES
  5) Select Remesh domain icon
  select mesh method = projection (impact neighbor
  domains=selected
  and smooth projected mesh not selected)
  select the area
  -right click in order to get the PROPERTIES and
  change transparency or
  color -select OK
  click ok to terminate
  .
  Expected result:
  CATIA should not Abend while changing
  color.
  .
  

Local fix

Problem summary

• ANALYSIS (FEM) / CATIA ABENDS WHEN CHANGE GRAPHIC PROPERTIES.
  ANALYSIS (FEM) / CATIA ABENDS WHEN CHANGE
  GRAPHIC PROPERTIES.
  .
  Scenario.
  .
  1) Open the CATAnalysis file
  2) Under the link.1 double click on every part
  3) Recompute the mesh Advanced Surface Mesh.1
  (double click and
  validate the global parameters)
  You get a warning: do you want to keep the
  simplified geometry and mesh
  select YES
  4) Recompute the mesh Advanced Surface Mesh.2
  (double click) warning: do you want to keep the
  simplified geometry and mesh select YES
  5) Select Remesh domain icon
  select mesh method = projection (impact neighbor
  domains=selected
  and smooth projected mesh not selected)
  select the area
  -right click in order to get the PROPERTIES and
  change transparency or
  color -select OK
  click ok to terminate
  .
  Expected result:
  CATIA should not Abend while changing
  color.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R19SP03
  Incident Diagnosis
  An attribute was getting corrupted after the change
  graphic properties command
  Correction Explanation
  Now it has been corrected such that the attribute is
  no more corrupted and graphic properties can be
  changed
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN SP51903

     UP09/01/22 I 1000