HD79361: UI: AUTOMATIC DISCONNECT NOT WORKING ON HP UNIX

APAR status

• Closed as program error.

Error description

• UI: AUTOMATIC DISCONNECT NOT WORKING ON
  HP UNIX
  .
  SCENARIO:
  .
  1. Start CATIA (V5R18 Level) on HP UNIX maichin
  2. Go to TOOLS/ OPTIONS/ GENERAL and set
  Automatic disconnection option to 2 minutes
  3. and restart CATIA
  4. Wait for 2minutes without interrupting CATIA
  .
  Result: CATIA will not disconnect automatically
  after 2 minutes
  .
  Expected result: CATIA should disconnect after 2
  min when automatic disconnection option is set to 2
  min.
  .
  

Local fix

Problem summary

• UI: AUTOMATIC DISCONNECT NOT WORKING ON HP UNIX
  UI: AUTOMATIC DISCONNECT NOT WORKING ON
  HP UNIX
  .
  SCENARIO:
  .
  1. Start CATIA (V5R18 Level) on HP UNIX maichin
  2. Go to TOOLS/ OPTIONS/ GENERAL and set
  Automatic disconnection option to 2 minutes
  3. and restart CATIA
  4. Wait for 2minutes without interrupting CATIA
  .
  Result: CATIA will not disconnect automatically
  after 2 minutes
  .
  Expected result: CATIA should disconnect after 2
  min when automatic disconnection option is set to 2
  min.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V519SP04 AND ON V5R18SP08
  .
  Incident Diagnosis
  Automatic disconnect is not working on Unix
  machine
  .
  Correction Explanation
  The automatic disconnect functionality was not
  working on user's reported level. Now the
  correction is made so that it works correctly and
  CATIA can be disconnected after the specified time
  duration.
  Answer and By-Pass
  None
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 HP-UX

• Fixed component ID

  569102000

Applicable component levels

• R518 PSN

     UP