HD78319: ASD : SOME PARTS ARE NOT DISPLAYED IN ASSEMBLY.

APAR status

• Closed as program error.

Error description

• ASD : SOME PARTS ARE NOT DISPLAYED IN
  ASSEMBLY.
  .
  SCENARIO:
  0) Apply user defined CATIA settings.
  1) Start CATIA.
  2) Open PumpMotor.CATProduct.
  3) Some of the part (Pump) is not displayed, even
  when those parts are supposed to be shown (they
  are not hidden).
  4) However, if we open the Pump.CATPart and then
  open the PumpMotor.CATProduct, then parts are
  displayed properly.
  .
  OBSERVATION:
  Pump is not displayed in the
  PumpMotor.CATProduct.
  .
  EXPECTED RESULT:
  Pump should be displayed correctly.
  .
  

Local fix

Problem summary

• ASD : SOME PARTS ARE NOT DISPLAYED IN ASSEMBLY.
  ASD : SOME PARTS ARE NOT DISPLAYED IN
  ASSEMBLY.
  .
  SCENARIO:
  0) Apply user defined CATIA settings.
  1) Start CATIA.
  2) Open PumpMotor.CATProduct.
  3) Some of the part (Pump) is not displayed, even
  when those parts are supposed to be shown (they
  are not hidden).
  4) However, if we open the Pump.CATPart and then
  open the PumpMotor.CATProduct, then parts are
  displayed properly.
  .
  OBSERVATION:
  Pump is not displayed in the
  PumpMotor.CATProduct.
  .
  EXPECTED RESULT:
  Pump should be displayed correctly.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R19SP03.
  .
  INCIDENT DIAGNOSIS:
  In assembly design workbench, some parts are not
  displayed in assembly.
  When a catpart is opened and closed first and later
  the catproduct(containing that catpart) is opened,
  the catpart is displayed (the catpart and catproduct
  are created on a different layer).
  .
  CORRECTION EXPLANATION:
  The above problem occured because while opening
  the catproduct, old settings of the part are used
  which was opened and closed before opening the
  product. Due to modification done in algorithm
  now, if a catpart is opened and closed first and
  then catproduct is opened then the catpart will not
  be seen if it is on a different layer than the layer on
  which catproduct is created. To view the part user
  will have to apply appropriate filter from
  Visualization Filters.
  .
  ADDITIONAL INFORMATION:
  When the catpart and catproduct are opened at
  same time then the catpart is displayed in the
  catproduct. In this case there is no solution as if
  objects are visualized twice at a time, the
  visualization infrastructure does not allow to show it
  in a viewer and hide it in the second viewer. Please
  refer to the following documentation reference for
  more clarification.
  .
  DOCUMENTATION REFERENCE:
  Catia Infrastructure \ Infrastructure \ Customizing
  \ Customizing Settings \ General \ Display \ Layer
  Filter
  .
  ANSWER AND BYPASS:
  None.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN SP51903

     UP09/01/22 I 1000