IBM Support

HD78026: CATIA ABENDS IF "POLER EXTREMUM" WITH "OFFSET SURFACE"

Subscribe

You can track all active APARs for this component.

 

APAR status

  • Closed as program error.

Error description

  • CATIA ABENDs if "Poler Extremum" with "Offset
    Surface"
    .
    Scenario:
    1. Start CATIA
    2. Open the sent file "XXXX.CATPart".
    3. Change the workbench to " Generative Shape
    Design ".
    >> start > shape > Generative Shape Design
    .
    4-1. Select the icon "Extremum polar"
    >> "Polar Extremum Definition" window is opened.
    .
    4-2. Define the "Contour" and "Support", as below.
    >> Contour = Circle.1
    >> Support = Offset.1
    .
    ==> Key point : "Offset.1" is created by "Offset
    Surface".
    .
    Result: ABEND occurs in this case only if "Offset
    Surface" is used for "Support" in the "Poler
    Extremum Definition".
    .
    4-3. Select the feature "Point.2" as "Origin"
    of "Axis" in the specification tree
    >> "Runtime exception" window is opened.
    .
    CATIA gets ABEND.
    ==>This is the problem.
    .
    <Expected Result>
    the command "Extremum Poler" with "Offset
    Surface" used for "Support" in the Poler Extremum
    Definition" can be used without ABEND.
    .
    

Local fix

Problem summary

  • CATIA ABENDs if "Poler Extremum" with "Offset Surface"
    CATIA ABENDs if "Poler Extremum" with "Offset
    Surface"
    .
    Scenario:
    1. Start CATIA
    2. Open the sent file "XXXX.CATPart".
    3. Change the workbench to " Generative Shape
    Design ".
    >> start > shape > Generative Shape Design
    .
    4-1. Select the icon "Extremum polar"
    >> "Polar Extremum Definition" window is opened.
    .
    4-2. Define the "Contour" and "Support", as below.
    >> Contour = Circle.1
    >> Support = Offset.1
    .
    ==> Key point : "Offset.1" is created by "Offset
    Surface".
    .
    Result: ABEND occurs in this case only if "Offset
    Surface" is used for "Support" in the "Poler
    Extremum Definition".
    .
    4-3. Select the feature "Point.2" as "Origin"
    of "Axis" in the specification tree
    >> "Runtime exception" window is opened.
    .
    CATIA gets ABEND.
    ==>This is the problem.
    .
    <Expected Result>
    the command "Extremum Poler" with "Offset
    Surface" used for "Support" in the Poler Extremum
    Definition" can be used without ABEND.
    .
    

Problem conclusion

  • THIS PROBLEM WILL BE FIXED ON CATIA VERSION
    5 RELEASE 20 GA LEVEL.
    NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
    ON V5R19SP03 AND ON V5R18SP08
    Incident Diagnosis
    CATIA ABENDs if "Poler Extremum" with "Offset
    Surface"
    Correction Explanation
    Correction is made so that there is no CRASH in
    CATIA even if the plane is offset surface.
    .
    

Temporary fix

Comments

APAR Information

  • APAR number

    HD78026

  • Reported component name

    CATIA V5 NT>XP

  • Reported component ID

    569151000

  • Reported release

    517

  • Status

    CLOSED PER

  • PE

    NoPE

  • HIPER

    NoHIPER

  • Special Attention

    NoSpecatt

  • Submitted date

    2008-09-18

  • Closed date

    2008-12-01

  • Last modified date

    2009-02-24

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

Fix information

  • Fixed component name

    CATIA V5 NT>XP

  • Fixed component ID

    569151000

Applicable component levels

  • R518 PSN SP51808

       UP09/02/24 I 1000

[{"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Product":{"code":"SSVJ2K","label":"CATIA"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"517","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}}]

Document Information

Modified date:
24 February 2009