HD77202: CCV: FILLET RADIUS REDUCTION: BAD RESULTANT SHAPE AFTER THE OPE RATION

APAR status

• Closed as program error.

Error description

• CCV: FILLET RADIUS REDUCTION: BAD
  RESULTANT SHAPE AFTER THE OPERATION
  .
  SCENARIO:
  0. Start CATIA V5
  1. Open CATPart.
  WB ? Core and Cavity design
  2. Start the Reduce Fillet Radius command.
  3. Select two faces.
  4. Target Radius is 1mm.
  5. Click Apply and OK.
  .
  PROBLEM:
  The result shape is bad.
  .
  

Local fix

Problem summary

• CCV: FILLET RADIUS REDUCTION: BAD RESULTANT SHAPE AFTER THE OPE
  RATION
  CCV: FILLET RADIUS REDUCTION: BAD
  RESULTANT SHAPE AFTER THE OPERATION
  .
  SCENARIO:
  0. Start CATIA V5
  1. Open CATPart.
  WB ? Core and Cavity design
  2. Start the Reduce Fillet Radius command.
  3. Select two faces.
  4. Target Radius is 1mm.
  5. Click Apply and OK.
  .
  PROBLEM:
  The result shape is bad.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R19SP02
  Incident Diagnosis:
  The result shape is bad with Fillet radius reduction
  .
  Correction Explanation:
  Corrected - The result shape is now correct with
  Fillet radius reduction.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN SP51902

     UP08/11/07 I 1000